It's for free!

[wonderbanana]

There must be way to reset that password, My B&O has a password too but no way of disabling it - that I can see.

Nah, you can deffo disable it. I’ve done it on mine.
I can’t remember exactly how, but I’ll look it up and let you know

To be clear, I’m not saying you can’t disable it but that if you don’t and store long term, it can permanently brick your 4200.

[ChrisBEANS]

There must be way to reset that password, My B&O has a password too but no way of disabling it - that I can see.

Nah, you can deffo disable it. I’ve done it on mine.
I can’t remember exactly how, but I’ll look it up and let you know

To be clear, I’m not saying you can’t disable it but that if you don’t and store long term, it can permanently brick your 4200.

Hmmm. That sounds like a colossal flaw…

I bought an MX8000 recently, with a pin, hadn’t been used in years, and it was fine.

Want me to send you a remote, see if you can get it going?

[wonderbanana]

Nah, you can deffo disable it. I’ve done it on mine.
I can’t remember exactly how, but I’ll look it up and let you know

To be clear, I’m not saying you can’t disable it but that if you don’t and store long term, it can permanently brick your 4200.

Hmmm. That sounds like a colossal flaw…

I bought an MX8000 recently, with a pin, hadn’t been used in years, and it was fine.

Want me to send you a remote, see if you can get it going?

Thanks for the offer bud As I said before though, I had and still have several remotes but have since passed the TV on. The info I have came from a B&O engineer. He could be wrong of course but from my understanding its quite a common problem. The 4200 has different internals to the other MX4000 series. Bugger to work on apparently.

[ChrisBEANS]

Ah, sorry. Totally misunderstood, thought you had the TV and no remote.
If that info came from a B&O engineer, I’d assume he knows at least a little more about B&O TVs than me

I’ll shut up now. Sorry.

[ChrisBEANS]

Cheers, would be good to know

Right. I ‘think’ if using the Beolink 1000 remote… you press ‘menu’, the left arrow (or rewind) twice, then stop

From there, you can change, or delete the PIN.

I’ll actually confirm this was what I did when I’m back with the TV later. I’m sure that’s right though…

[thegreathopper]

Will give it a try, it’s a 4200 that has a pin - just a hassle to input each time I turn on.

Thanks will let you know how it goes.

[ChrisBEANS]

Will give it a try, it’s a 4200 that has a pin - just a hassle to input each time I turn on.

Thanks will let you know how it goes.

Confirmed to work on an MX8000 with firmware 1.6…

Hopefully it’ll be the same on the 4200??

[thegreathopper]

Before I try, do I do that button combination before i put my code in or do I power on put my code in and then the button combo?

Cheers.

[ChrisBEANS]

Turn on, code in, then combo

[thegreathopper]

Woo Hoo it works, it asked if I wanted to change or delete code and I deleted. I used the newer remote with the screen..

Cheers Chris

[FrancoB]

Got a few of my repro marquee holders going spare:

1 x Capcom Cute
2 x Jaleco Pony Mark III 25

One of the Ponys has bolts, the other doesn't, If I can find some I'll include them.



Just pay shipping. A charity donation would be nice if you see fit.

All three have been claimed.

[thomj]

Ooh, can I have the Cute one please?

[FrancoB]

A Cute holder for a cute guy, sure thing

All three have been claimed.

[Ddshot]

Viewlix c/f monitor,can’t bring myself to bin it,tbh looked pretty decent.free for anyone who wants to collect

[Pete]

Wei-YA 32" Monitor MT32W-D860B (LG panel) + Faulty PSU & HDMI-DVI lead:


Now scrapped!

[Ddshot]

Viewlix c/f monitor,can’t bring myself to bin it,tbh looked pretty decent.free for anyone who wants to collect

Last chance on this,it’s going in the bin Friday

[cools]

GONE
Retrogamingcables packapunch MD2 RGB SCART

I struggled to get a reliable connection with this at the MD end. Even filed down the outer shield a bit to try and make it better. A new cable worked fine from the start. Might be okay, might need a new connector

Just pay postage (3.39?)

[g4rou]

WeChe Ok Baby parts, speakers are still intact.

IMG_1146.jpg

IMG_1145.jpg

[ChurchOfSolipsism]

3x defective PS2 Tatacon controllers for Taiko no Tatsujin (I only have one pair of plastic bats or whatever you call those things you use to hit the drums, though) - they still work but only register like every third hit. I have one original box, too, if anybody wants that (it'll probably raise shipping costs, though).
Repairing them seems to be quite simple, there's tutorials on youtube, but I can't be bothered since we're moving house. gone/ only one tatacon controller (+ box) left, get it while it's hot!

J-pac Ultimarc, PS/2-version, new, comes with a PS/2-cable gone!

[trev1976]

3x defective PS2 Tatacon controllers for Taiko no Tatsujin (I only have one pair of plastic bats or whatever you call those things you use to hit the drums, though) - they still work but only register like every third hit. I have one original box, too, if anybody wants that (it'll probably raise shipping costs, though).
Repairing them seems to be quite simple, there's tutorials on youtube, but I can't be bothered since we're moving house.

edit: only one tatacon controller (+ box) left, get it while it's hot!


edit II: decided to give away J-pac Ultimarc, PS/2-version, new, comes with a PS/2-cable

Could I take the Jpac please