Jaleco Pony Mark III 25

[FrancoB]

I've been working on marquee holders for these today if you are interested. Clear front and frosted back.

[virtvic]

Anyone on here (except me) got a Pony II?

[gargoyle67]

I've been working on marquee holders for these today if you are interested. Clear front and frosted back.

Not unless he makes the top box's that holds it

[Neo Gold]

Anyone on here (except me) got a Pony II?

Yes...pony MkII-28?..mines in teh gallery

[virtvic]

What page in the gallery is it on, neogold?

I'll get mine in there soon.

[Neo Gold]

What page in the gallery is it on, neogold?

I'll get mine in there soon.

Page 12..

[cools]

A new vector project ?

Something like that. Finished

pony.png

[Devil Soundwave]

4 buttons for Neo Geo, "?" for select button?

[mastercello]

It means "P" for player 1 and 2

[Rossyra]

looks like the ? not P to me...

[gargoyle67]

@Cools, What joystick would fit the Pony mk3 ? Would my Seimitsu LS-32-01 fit ok with the Mounting Plate RE ?

[cools]

They're LS-32 with RE plates as stock

[gargoyle67]

Nice

[gargoyle67]

As you know I'm going to have my Pony resprayed when I get it, What's the advantage of power coating and baking ? Does it harden the paint better. I've got a car re-sprayer literally across the road from me, So I was just going to dismantle and get him to rub it down and re-spray, Any good ? or would I be better tracking down a place that can sand blast and power coat ?
How many pieces does the pony come down to when fully stripped ?

[cools]

Best to check penrhos thread about that

Powdercoating is far more hardwearing than painting.

http://www.finishing.com/Library/pennisi/powder.html"

"When powder coated items are installed without damage to the powder coating and they are maintained regularly, they should be relatively permanent. The correctly applied coating, although not metallurgically bonded to the metal will not crack, chip or peel as with conventional paint films."

[gargoyle67]

mmm may be a bit ott, How many parts does the Pony come down to when stripped ?

[cools]

mmm may be a bit ott, How many parts does the Pony come down to when stripped ?

Best to check penrhos thread about that

I've not stripped one down yet.

[gargoyle67]

Ahh sorry I thought you meant check out the penrhos thread about power coating, Thanks

[gargoyle67]

Can't find the penrhos thread on advanced search with his screen name plus pony or power coat in search box I suppose we'll both find out soon enuff

[penrhos]

It strips down into 10 pieces (if the marquee is missing).

Before you start you need to remove the chassis from the tube & cab (so discharge tube, disconnect neckboard, Degauss, Yoke plug, earth lead, video lead)

Open CP
Remove glass & bezel
Undo bolts holding CP to base (remove CP)
Undo all bolts under CP (remove flat plate under CP & lock bar)
Undo bolts holding Speaker panel to base (remove speaker and other bolts)
Undo bolts holding monitor in place.
Remove monitor
Undo bolts holding monitor mounts to case & remove
Remove on/off switch & drop wires into base
There is a ring of nuts/bolts holding the top on (remove all of them & lift top off)
Undo bolts holding coin mech to side of base & remove
Undo screws holding cashbox to base & remove
There are nuts/bolts holding the sides together (remove all and extract the two metal filler plates)
Remove the bolts holding the back/front to the base and remove sides
Remove 4 bolts that hold PSU onto base & remove

Done!