I got a cab for nowt, but the MS8 had terrible screen burn. There's a prize if you can name the game - I must concede, I'm stumped



I bought an MS9 tube from Mo for £40 with minimal burn with the intention of swapping out the tubes, and if it didn't work, then I could either sell the MS9 tube, or buy an MS9 chassis.
So it's out with the old
and discharge the monitor
and in with the new
Not the most impressive result, but to be honest, I expected worse.
After a chat with Craig @ giz10p.co.uk on mIRC, I turned down the LOPT which got rid of the retrace lines, and had a play about until I found the pincushion adjustment. I also connected up a game with a crosshatch.
Et voila!!
Still a little out on the trapezoid adjustment, and although noticeable ingame
it's certainly preferable to the horrendous burn that I started out with.
Props to Richy for the cab, and to Craig @ giz10p.co.uk for continuing to patiently put up with my irritating n00b questions.
I'm going to say RESULT!!! as I'm about 85% happy with the outcome.
Cheers y'all,
a_m.