what are these connectors in my AWSD? (sadly, no pics)

[Oliversum]

My cam is gone till next weekend, so I cannot make any pics of these connectors I found in my AWSD cab.

These are named:

P (x2, and can be plugged into each other, but the wires on one side are cut up)
C
F
S (x2, one of it is the other end of one of the P connectors, if I'm right)
C3 (long connector with 2 wires in it)


thanks for your time!

[Shady994]

P = Speakers
C = 12V supply for optional audio amp
F = Speakers
S = Button 6 for P1 and P2
C3 = Same as above

The AWSD manual is available in the Wiki, and all these connectors are referenced in the wiring diagram on page 61.

[Oliversum]

P = Speakers
C = 12V supply for optional audio amp
F = Speakers
S = Button 6 for P1 and P2
C3 = Same as above

The AWSD manual is available in the Wiki, and all these connectors are referenced in the wiring diagram on page 61.

are P and F each for both speakers (stereo) or is each connector for one of the speakers?

S and C3 are for the 6th Button, so I can assume, that 1-5 are already wired into Jamma? Or is the 5th Button also seperate?
EDIT: Figured it myself out with the wiring diagram, but do you know if a JPAC will accept the 5th button on the Jamma connector?