SEGA CP measurements?

[emphatic]

I'm thinking about buying a SEGA 1L panel and fit on my Xiong Ba cabinet as I never play 2 player games or Robotron anyways.
I don't know how to go about finding a 1L panel though, but.... since Xiong Ba is clearly a knockoff of SEGA cabs, perhaps the panel will fit it.

So, the panel on my Xiong Ba(sheet metal) is 110 mm high and approx 645 mm wide (actually, the metal part is only about 105 mm high, but it needs to be 110 mm to be all snug against the mounting space in the plastic. Is this a close match of SEGA's panels? Like Astro/VS/Blast City and the likes?

[FrancoB]

I just got the dims from the panel I made for my Naomi and it appears to be approx 631x130mm

[emphatic]

FrancoB: Thanks.

That's too bad. I guess I'll have to try and borrow a loose panel from someone locally before I actually buy one.

[Akuma]

From the mere look of it and since it seems to be a 50% New Versus City bootleg, I'd guess a Sega CP should fit.

[emphatic]

So, can someone verify if all SEGA panels are the same size, and if not, which ones are the same size as the New Vs City ones?

[Akuma]

Yep,

Sega (New) Astro City (2), Blast City, (New) Net City, Naomi Uni, (New) Versus City, Megalo 410, Capcom Impress, Konami WIndy (2), Namco Cyberlead are interchangeable sizewise.

Actually, someone once mentioned that Sega panels fit into Egrets (with gaps of course) - so if you test to put in your Xiongaba panel into the Egret, you might see if the bolt holes align