Flat Mounting Plate LS-56 New Astro City

[trev1976]

Hi

I'm looking to fit a flat plate in my astro because the SS seems to make the stick a bit tall.

I've tried some plates I have in my spares but they don't seem to line up ? Any ideas what I would need.

https://ibb.co/t2c9WJD

Thanks

[trev1976]

Im thinking this will do the trick , im looking for the height to be about 23mm (currently about 27mm) spacing holes need to be 80mm centre to centre and not 85mm like the current P40 plate.

https://www.aliexpress.com/item/1005004 ... YcSjb&mp=1

Thanks

[FrancoB]

There are no dimensions for the cab mounting holes but I would hazard a guess and say that they would fit 40x80mm studs based off the rest of the adapter plate.

If you don't want to risk it I'm happy to print one of [these] for you for free if you wanted one. The slots for fitting the plate to the studs in the control panel are the same as the JLF-P1 plate and allow for a pitch of 40mm x 75-85mm.

[trev1976]

Hi Franco , I've only just noticed this reply lol. I've actually got a new repro panel coming from arcade art shop so ill see how it fits in there and let you know.

Thanks