Vewlix FC Control Panel + Seimitsu joystick

[supabok]

Hi folks,
wondering what options I'd have if I wanted to mount an LS-32 on my Vewlix C Control Panel?

I removed the JLF in my current setup and tried a couple of plates (SS, Flat , Small Universal) but none of them fit the screws in the CP as they're all a bit smaller in width...

Any suggestions greatly appreciated!

cheers

[nem]

You need to replace the Taito mounting brackets.

Is your stud arrangement on the panel square or rectangular?

[supabok]

Hi Nem,
Stud arrangement looks rectangular and the screws are set wider than all current plates I have.

The plate that's currently there, with a JLF, looks like an inverted SS plate actually. The JLF is mounted directly to that plate and then mounted to the CP.

[nem]

Seimitsu makes a mounting plate that will fit on your panel. You don't need the Taito mounting bracket in between.

https://seimitsuin.thebase.in/items/50038121

[supabok]

Seimitsu makes a mounting plate that will fit on your panel. You don't need the Taito mounting bracket in between.

https://seimitsuin.thebase.in/items/50038121

Thx Nem! I had no idea this plate was a thing :O

It inspired me to go to my favorite parts supplier, Tops, to purchase and noticed they also had this base plate:
https://www.tops-game.jp/products/detai ... ct_id=6375

I just purchased this since they're stateside:
https://paradisearcadeshop.com/products ... pter-plate

I'll see how it goes and if the universal doesn't work out, i'll opt for the official seimitsu ones.

Thanks for the help
cheers