Blast City panel - which sticks?

Post by **Pat70** » September 11th, 2009, 4:54 pm

My recently acquired original Blast City panel (not the licensed by) needs new sticks, but I am not sure which ones.
Sanwa JLF's? and which mounting plate/do I even need a mounting plate?

thnx!

Post by **SuperPang** » September 11th, 2009, 5:18 pm

Sanwas will screw straight on that, or Seimitsu LS 55 with the correct plate.

Post by **Pat70** » September 11th, 2009, 5:25 pm

thnx pang. I'll get me some sanwa's then.

btw...will I have to rewire anything? since the mounting holes are 90 dgrs different from an astro panel?

tetsujin · Post by **tetsujin** » September 12th, 2009, 3:32 pm

Sanwa JLF's will fit on as SP said.

Re 're wiring', you dont need to re wire but if there is a problem you can always move the micro switch plate 90' to make it work.

You wan the connector on the joystick to be pointing torwards the monitor or basically upwards in you photo

Post by **Pat70** » September 12th, 2009, 3:58 pm

thnx iron man!

Post by **kaneda56** » September 13th, 2009, 8:40 am

do you plan to put that panel on your astrocity?

Post by **Pat70** » September 13th, 2009, 3:23 pm

kaneda56 wrote:do you plan to put that panel on your astrocity?

No, I plan to put it on my Blast City.

TwonK · Post by **TwonK** » September 14th, 2009, 5:46 am

If I'm facing my Blast, and the CP is open, both of my JLF connectors are facing left.

Plenty of room in there.

Blast City panel - which sticks?

Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?

Re: Blast City panel - which sticks?