Volfied PCB problem

PCB problems and fixes
Post Reply
User avatar
Posts: 14
Joined: January 10th, 2019, 12:41 pm
Location: Teesside
eBay: mrpauldobson
Initials: dob

Volfied PCB problem

Post by mx5dob » September 20th, 2019, 3:10 pm

Hi all. Just picked up a Volfied PCB from Yahoo auctions. It's supposed to be working fine but I can't get anything on the screen. The sounds works ok, just no image.

I've measured the voltage at one of the chips and it's a steady 5.03v plus ive tried it on my supergun and no joy on that either.

Any ideas?

User avatar
Posts: 6759
Joined: December 5th, 2008, 1:14 pm
Location: ._.
eBay: ._.

Re: Volfied PCB problem

Post by geotrig » September 20th, 2019, 6:36 pm

Don't some Taito pcbs have issue with video ground but I suppose if it was that you would have something on the screen

<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"

User avatar
Posts: 112
Joined: May 24th, 2013, 11:55 am
Location: Italy
eBay: private
Initials: FAB

Re: Volfied PCB problem

Post by caius » October 2nd, 2019, 9:51 pm

The problem is obviously related to the 'TC0070RGB' modul,e most likely it got detached.But you already know this ;)

Posts: 132
Joined: February 22nd, 2018, 4:35 am
Location: Chicago
eBay: Awbacon
Initials: Aeb

Re: Volfied PCB problem

Post by Awbacon » October 6th, 2019, 4:24 pm

Have you checked continuity between chips and the video output area? Sounds like something clearly isn't 'moving"

Could be a cold joint somewhere that cracked during shipping

User avatar
The bead-o empire
Posts: 228
Joined: June 26th, 2009, 10:38 am
Location: Germany

Re: Volfied PCB problem

Post by dingsbums » October 6th, 2019, 10:26 pm

Your Power Supply has - 5Volt ? Volfied needs it.

Post Reply