OpenJAMMA board
-
Asure
- Please Continue...
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: OpenJAMMA board
Seems to me like a little wrapping wire to the Jamma edge will output the VGA there. Then it just needs a driver which supports 15K video (Soft15k?), and an updated mame/frontend which takes the inputs on the Jamma edge and we're sorted. What's the price range on these boards?
-
mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
Re: OpenJAMMA board
You need a video amplifier as JAMMA signal levels are higher than VGA signal levels.Asure wrote:Seems to me like a little wrapping wire to the Jamma edge will output the VGA there.
-
pubjoe
- Fosters Political Ambitions
- Posts: 10070
- Joined: August 19th, 2008, 8:58 am
- Location:
Re: OpenJAMMA board
Depending on the screen you can sometimes get by without one.