PGM3?

pulstarx · Post by **pulstarx** » January 4th, 2013, 12:09 pm

Wow

a PGM3?

http://www.excellentcom.net/detail.asp? ... 7&private="

Anyone has more infos on that? It seems to be 15khz+31khz? JVS?

The PGM2 didn't hold long did it?

Post by **geotrig** » January 4th, 2013, 12:15 pm

pulstarx wrote:Wow a PGM3?

http://www.excellentcom.net/detail.asp? ... 7&private="

Anyone has more infos on that? It seems to be 15khz+31khz? JVS?
The PGM2 didn't hold long did it?

looks at jamma connector

pulstarx · Post by **pulstarx** » January 4th, 2013, 12:25 pm

geotrig wrote: looks at jamma connector

Why not just have both?!

Post by **geotrig** » January 4th, 2013, 12:26 pm

this is probably only released for the same 2 or 3 titles that was on pgm 2 mainly ,still all new stuff is welcome

Post by **SuperPang** » January 4th, 2013, 12:39 pm

I had heard there was a new "HD" version of KOV3 but took that with a pinch of salt. Looks like an LCD cab friendly hardware update. Game certainly doesn't look much different.

davewellington · Post by **davewellington** » January 4th, 2013, 8:45 pm

Here's the chinese for Knights of Valour 3 HD if anyone is interested in seeing more of it "三国战纪3高清".

davewellington · Post by **davewellington** » January 4th, 2013, 8:53 pm

PGM3 hardware shots

KOV3HD poster

Paulie · Post by **Paulie** » January 4th, 2013, 9:12 pm

will have to check out some vids.

StandardDeluxe · Post by **StandardDeluxe** » January 5th, 2013, 9:19 pm

Well this is certainly good news, hopefully it'll get more games than its predecessor. Demon Front 2 please

Post by **TheRedKnight** » January 5th, 2013, 9:28 pm

I know this is sort of sad, but hopefully the NESiCA x Live versions of KOF 98UM and 2002UM end up on this..

trap15 · Post by **trap15** » January 5th, 2013, 11:54 pm

This looks ridiculously sexy. Hopefully more stuff comes to this than did to PGM2. Definitely would be on-board for a Demon Front 2

SuperMenteur · Post by **SuperMenteur** » January 7th, 2013, 10:25 am

Any info on the "USB" port ?

Is that a JVS-compatible port or a regular USB port ?

EDIT : My bad, I should have paid more attention at the photos, there are 2 USB ports and 2 JVS.

Looks like a pretty decent board.

I hope it will help drop the price of the PGM2.

LorisBiaggi · Post by **LorisBiaggi** » January 7th, 2013, 11:28 am

NeoD · Post by **NeoD** » January 8th, 2013, 6:34 pm

Is KOV3 actually gonna be high res? Could be amazing.

NeoD · Post by **NeoD** » January 8th, 2013, 6:36 pm

The website just shows all the same old sprites lol

Post by **Sunken** » January 14th, 2013, 5:43 am

The system looks more sexy than all the new ugly PC-like systems!

SuperMenteur · Post by **SuperMenteur** » January 14th, 2013, 10:49 am

Sunken wrote:The system looks more sexy than all the new ugly PC-like systems!

Maybe it's a PC architecture in there. Only nice on the outside.

lanny · Post by **lanny** » July 27th, 2014, 2:28 am

I am trying to get the game running on my Taito Egret 3, via the internal JVS power connector and VGA connection. First I see the Checking game, message, then checking system and after that, my monitor goes crazy...screen stays black and I hear that the cab cannot find a correct frequence...what is wrong ? Has anybody an english manual ? Especialy for the DIP settings...

Post by **Santashiva** » July 27th, 2014, 5:59 pm

I just found this :

Here are the actual dipswitch settings (manual has it wrong):

1: OFF = Game mode / ON = Test mode
2: OFF = JAMMA / ON = JVS
3: OFF = 16/9 (1280x720) / ON = 4/3 (800x600)
4: NO USE

The game works on HD cabinets only.

May be that will help you

lanny · Post by **lanny** » July 28th, 2014, 8:55 am

Thanks ! That helped a lot and indeed : the manual is wrong !

I was only to get the baby running with the following setup :

1. Power supply via JVS from my Taito Egret 3
2. MAK connected to the JAMMA Port of the PGM3 for controls (JUST the MAK WITHOUT power)
3. 2 SNK NEO GEO Joypads hooked up to the MAK
4. VGA connection to my TFT monitor

It seems that the system does not accept power from my MAK, or do I do something wrong ? I would prefer NOT to use my Egret and just use everything external. Is there a JVS power adapter available ?

PGM3?

PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?

Re: PGM3?