Taito Jamma JVS AMP pcb Pin Out. (Info)

Arcade cabinet hardware and accessories
Post Reply
User avatar
monouchi
Polishing his shaft
Posts: 1120
Joined: February 21st, 2010, 6:16 pm
Location: Sweden
eBay: monouchi_jn
Initials: BUS

Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by monouchi »

After a lot of mailing back and forth with Taito Tech I managed to get the Pin Out of the JVS AMP pcb.
Now we can see where the additional buttons are on connector B.
Feel free to add to the wiki.
taitojvspinout.jpg
User avatar
cools
Armed Police Buttrider
Posts: 12762
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by cools »

I thought this was already there, I have the bit of paper and could've scanned it a long time ago if I'd known :oops:
Image
User avatar
monouchi
Polishing his shaft
Posts: 1120
Joined: February 21st, 2010, 6:16 pm
Location: Sweden
eBay: monouchi_jn
Initials: BUS

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by monouchi »

cools wrote:I thought this was already there, I have the bit of paper and could've scanned it a long time ago if I'd known :oops:
Haha, damn, I was looking like mad for the pin-out over the net. :crazy:
User avatar
PrincessPrinPrin
Posts: 495
Joined: April 7th, 2011, 4:00 pm
Location: Pordenone, Italy
eBay: *mkl*
Initials: MKL

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by PrincessPrinPrin »

It's exactly the same as the aux connector on the sega I/O...
Im running games with a vga to tv converter on my Shangai Novel, with composite and it looks amazing, Im not interested in RGB or Scart.

- anonymous
User avatar
monouchi
Polishing his shaft
Posts: 1120
Joined: February 21st, 2010, 6:16 pm
Location: Sweden
eBay: monouchi_jn
Initials: BUS

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by monouchi »

PrincessPrinPrin wrote:It's exactly the same as the aux connector on the sega I/O...
Ok...
User avatar
invzim
Posts: 474
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by invzim »

Put some stuff about the different IO boards here
http://wiki.arcadeotaku.com/w/JVS

can this be linked from something better than Category:Technical -> Category:Pinouts -> JVS?
I make and sell cool Arcade stuff, check out https://irkenlabs.com/ - In The Name of Science!
zumbito
Posts: 644
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by zumbito »

Is this in the wiki? I haven't been able to find it in the IO section.
User avatar
LemonyVengeance
Please Continue...
Posts: 25
Joined: May 10th, 2012, 8:00 pm
Location: Mormon Mecca
eBay: Stanley_ipkiss22
Initials: LMN
Contact:

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by LemonyVengeance »

Necro bump, but here's the EXACT part numbers for the 60 pin connector:

housing (board Side): HIF3BA-60PA-2.54DSA(71)
connector (cable side): HIF3BA-60D-2.54C​
Pins: HIF3-2022SC​F
User avatar
penrhos
Panel Beater
Posts: 1477
Joined: September 11th, 2008, 12:08 pm
Location: Leicester - UK
eBay: ngpd002

Re: Taito Jamma JVS AMP pcb Pin Out. (Info)

Post by penrhos »

Pity the picture of the pinout is missing from here and the wiki - this is from the fastio manual (and the 60-pin is supposed to be the same as the JVS PCB)....
fastio-pinout.JPG
Taito - 60 pin:-

01 (+12V)
02 (+12V)
03 (+5V)
04 (+5V)
05 (ADC0)
06 (ADC1)
07 (ADC2)
08 (ADC3)
09 (ADC4)
10 (ADC5)
11 (ADC6)
12 (Analogue-GND)
13 (Analogue+5V)
14 (Analogue-GND)
15 (Coin SW1)
16 (Coin SW2)
17 (1P Service)
18 (2P Service)
19 (1P Start)
20 (2P Start)
21 (Test Sw)
22 (Tilt Sw)
23 (1P Up)
24 (2P Up)
25 (1P Down)
26 (2P Down)
27 (1P Left)
28 (2P Left)
29 (1P Right)
30 (2P Right)
31 (1P SW1)
32 (2P SW1)
33 (1P SW2)
34 (2P SW2)
35 (1P SW3)
36 (2P SW3)
37 (1P SW4)
38 (2P SW4)
39 (1P SW5)
40 (2P SW5)
41 (1P SW6)
42 (2P SW6)
43 (1P SW7)
44 (2P SW7)
45 (1P SW8)
46 (2P SW8)
47 (Coin Meter 1)
48 (Coin Meter 2)
49 (1P-Output 1)
50 (2P-Output 1)
51 (1P-Output 2)
52 (2P-Output 2)
53 (1P-Output 3)
54 (2P-Output 3)
55 (1P-Output 4)
56 (2P-Output 4)
57 (GND)
58 (GND)
59 (GND)
60 (GND)

For Power:-

P1.
01 (+12V)
02 (+12V)
03 (GND)
04 (GND)

P2.
01 (+12V)
02 (+5V)
03 (+5V)
04 (GND)
05 (GND)


Sega V3 - 60 pin:-

01 (+EXV)
02 (+EXV)
03 (+5V)
04 (+5V)
05 (+5V)
06 (+5V)
07 (+5V)
08 (+5V)
09 (GND)
10 (GND)
11 (GND)
12 (GND)
13 (GND)
14 (GND)
15 (GND)
16 (GND)
17 (1P Start)
18 (2P Start)
19 (1P Right)
20 (2P Right)
21 (1P Left)
22 (2P Left)
23 (1P Up)
24 (2P Up)
25 (1P Down)
26 (2P Down)
27 (1P SW1)
28 (2P SW1)
29 (1P SW2)
30 (2P SW2)
31 (1P SW3)
32 (2P SW3)
33 (1P SW4)
34 (2P SW4)
35 (1P SW5)
36 (2P SW5)
37 (1P SW6)
38 (2P SW6)
39 (1P SW7)
40 (2P SW7)
41 (1P Service)
42 (2P Service)
43 (Test Sw)
44 (Tilt Sw)
45 (Coin SW1)
46 (Coin SW2)
47 NC
48 NC
49 (Coin Meter 1)
50 (Coin Meter 2)
51 (Output 1-1)
52 (Output 2-1)
53 (Output 1-2)
54 (Output 2-2)
55 (Output 1-3)
56 (Output 2-3)
57 (+12V)
58 (+12V)
59 (+12V)
60 (+12V)

CN2
01 (+12V)
02 (+12V)
03 (NC)
04 (GND)
05 (GND)

CN7
01 (+5V)
02 (+5V)
03 (GND)
04 (GND)

CN6
01 (VCC)
02 (VCC)
03 (AD0)
04 (AD4)
05 (GND)
06 (GND)
07 (VCC)
08 (VCC)
09 (AD1)
10 (AD5)
11 (GND)
12 (GND)
13 (VCC)
14 (VCC)
15 (AD2)
16 (AD6)
17 (GND)
18 (GND)
19 (VCC)
20 (VCC)
21 (AD3)
22 (AD6)
23 (GND)
24 (GND)
25 (NC)
26 (NC)
2 * Vewlix Diamond Blacks,2 * Vewlix-F, 1 * Sega Rally 3, 1 * Video Pinball, 1 * DinoKing (JAMMA Converted).
Post Reply