Taito Jamma JVS AMP pcb Pin Out. (Info)

[monouchi]

After a lot of mailing back and forth with Taito Tech I managed to get the Pin Out of the JVS AMP pcb.
Now we can see where the additional buttons are on connector B.
Feel free to add to the wiki.

taitojvspinout.jpg

[cools]

I thought this was already there, I have the bit of paper and could've scanned it a long time ago if I'd known

[monouchi]

I thought this was already there, I have the bit of paper and could've scanned it a long time ago if I'd known

Haha, damn, I was looking like mad for the pin-out over the net.

[PrincessPrinPrin]

It's exactly the same as the aux connector on the sega I/O...

[monouchi]

It's exactly the same as the aux connector on the sega I/O...

Ok...

[invzim]

Put some stuff about the different IO boards here
http://wiki.arcadeotaku.com/w/JVS

can this be linked from something better than Category:Technical -> Category:Pinouts -> JVS?

[zumbito]

Is this in the wiki? I haven't been able to find it in the IO section.

[LemonyVengeance]

Necro bump, but here's the EXACT part numbers for the 60 pin connector:

housing (board Side): HIF3BA-60PA-2.54DSA(71)
connector (cable side): HIF3BA-60D-2.54C​
Pins: HIF3-2022SC​F

[penrhos]

Pity the picture of the pinout is missing from here and the wiki - this is from the fastio manual (and the 60-pin is supposed to be the same as the JVS PCB)....

Taito - 60 pin:-

01 (+12V)
02 (+12V)
03 (+5V)
04 (+5V)
05 (ADC0)
06 (ADC1)
07 (ADC2)
08 (ADC3)
09 (ADC4)
10 (ADC5)
11 (ADC6)
12 (Analogue-GND)
13 (Analogue+5V)
14 (Analogue-GND)
15 (Coin SW1)
16 (Coin SW2)
17 (1P Service)
18 (2P Service)
19 (1P Start)
20 (2P Start)
21 (Test Sw)
22 (Tilt Sw)
23 (1P Up)
24 (2P Up)
25 (1P Down)
26 (2P Down)
27 (1P Left)
28 (2P Left)
29 (1P Right)
30 (2P Right)
31 (1P SW1)
32 (2P SW1)
33 (1P SW2)
34 (2P SW2)
35 (1P SW3)
36 (2P SW3)
37 (1P SW4)
38 (2P SW4)
39 (1P SW5)
40 (2P SW5)
41 (1P SW6)
42 (2P SW6)
43 (1P SW7)
44 (2P SW7)
45 (1P SW8)
46 (2P SW8)
47 (Coin Meter 1)
48 (Coin Meter 2)
49 (1P-Output 1)
50 (2P-Output 1)
51 (1P-Output 2)
52 (2P-Output 2)
53 (1P-Output 3)
54 (2P-Output 3)
55 (1P-Output 4)
56 (2P-Output 4)
57 (GND)
58 (GND)
59 (GND)
60 (GND)

For Power:-

P1.
01 (+12V)
02 (+12V)
03 (GND)
04 (GND)

P2.
01 (+12V)
02 (+5V)
03 (+5V)
04 (GND)
05 (GND)


Sega V3 - 60 pin:-

01 (+EXV)
02 (+EXV)
03 (+5V)
04 (+5V)
05 (+5V)
06 (+5V)
07 (+5V)
08 (+5V)
09 (GND)
10 (GND)
11 (GND)
12 (GND)
13 (GND)
14 (GND)
15 (GND)
16 (GND)
17 (1P Start)
18 (2P Start)
19 (1P Right)
20 (2P Right)
21 (1P Left)
22 (2P Left)
23 (1P Up)
24 (2P Up)
25 (1P Down)
26 (2P Down)
27 (1P SW1)
28 (2P SW1)
29 (1P SW2)
30 (2P SW2)
31 (1P SW3)
32 (2P SW3)
33 (1P SW4)
34 (2P SW4)
35 (1P SW5)
36 (2P SW5)
37 (1P SW6)
38 (2P SW6)
39 (1P SW7)
40 (2P SW7)
41 (1P Service)
42 (2P Service)
43 (Test Sw)
44 (Tilt Sw)
45 (Coin SW1)
46 (Coin SW2)
47 NC
48 NC
49 (Coin Meter 1)
50 (Coin Meter 2)
51 (Output 1-1)
52 (Output 2-1)
53 (Output 1-2)
54 (Output 2-2)
55 (Output 1-3)
56 (Output 2-3)
57 (+12V)
58 (+12V)
59 (+12V)
60 (+12V)

CN2
01 (+12V)
02 (+12V)
03 (NC)
04 (GND)
05 (GND)

CN7
01 (+5V)
02 (+5V)
03 (GND)
04 (GND)

CN6
01 (VCC)
02 (VCC)
03 (AD0)
04 (AD4)
05 (GND)
06 (GND)
07 (VCC)
08 (VCC)
09 (AD1)
10 (AD5)
11 (GND)
12 (GND)
13 (VCC)
14 (VCC)
15 (AD2)
16 (AD6)
17 (GND)
18 (GND)
19 (VCC)
20 (VCC)
21 (AD3)
22 (AD6)
23 (GND)
24 (GND)
25 (NC)
26 (NC)