blast city rca jacks?

Arcade cabinet hardware and accessories
intangibleteknishun
Please Continue...
Posts: 34
Joined: July 27th, 2010, 1:01 am
Location:

blast city rca jacks?

Post by intangibleteknishun »

i just gutted a bass fishing blast city and have a 360 in it but cant seem to find the rca jacks,and if not how do i hack a 2.1 setup with the existing speakers? thanks.
Paladin
Please Continue...
Posts: 81
Joined: August 24th, 2010, 4:31 pm
Location: WA state
Initials: BAA

Re: blast city rca jacks?

Post by Paladin »

I just installed RCA jacks in my Blast City, as it didn't come with them either. What I did was to grab an RCA cable from my pile of cables, cut it in half, crimp on the proper JST RA pins to the cut ends and install the wires into pins 31-34 of connector CN5.

For future reference, here's the stereo pinout for connector CN5 on the I/O board from the Bass Fishing wiring diagram that I found on this site:
Pin 31 is Left +
Pin 33 is Left -
Pin 32 is Right +
Pin 34 is Right -
On an RCA cable, Red is Right and White is Left. The 'pin' that sticks out is the + signal, and the round outer part is the - signal.

AGS carries the JST RA pins:
http://triplemoonstar.brinkster.net/the ... ockid=1767"

I hope this helps.