BLAST CITY and SEGA MODEL 2 question

[SGO316]

HI !
i own a SEGA BLAST CITY cabinet. i use it with frecuently with CP2 and other arcade boards like SPIDERMAN, renegade, etc...
recently i bought a SEGA MODEL 2B "DYNAMITE COP" board.
i a bit confused on how i can connect it to the BLAST CITY.

( i already have the SEGA loom 001 for jamma/JVS connection . and the BLAST CITY I/O board ( Sega part # 839-0894 ) )
i add pics of the dynamite cop board and also the loom i have in my blast city and the cabinet i/o board (Sega part # 839-0894) ...
( i already tried connect directly it to the loom 001 and seems to not working..)
well...Thanks you so much !!!

[nem]

The jamma harness you have looks OK for the job. Does it not do anything with it connected?

Also, Model 2 is 24khz. So unless you have an autosyncing monitor, make sure your monitor is setup for it. It wouldn't stop the game from booting though.

[SGO316]

The jamma harness you have looks OK for the job. Does it not do anything with it connected?

Also, Model 2 is 24khz. So unless you have an autosyncing monitor, make sure your monitor is setup for it. It wouldn't stop the game from booting though.

Thanks so much nem !!!
i already managed to connect it with the current loom i have! ( it was a problem with some jamma contacts )
yes, i have autosyncing monitor !
thanks you so much !!!

[nem]

Great, happy to hear that.