Capcom CPS1 Q

PCB problems and fixes
Forum rules
ArcadeOtaku forum introduction & rules
Post Reply
User avatar
Neo'nate
Posts: 410
Joined: August 22nd, 2008, 2:52 pm
Location: London and the SWest
Initials: NJP

Capcom CPS1 Q

Post by Neo'nate » March 17th, 2019, 10:03 am

I have bought a Varth CPS1 a/b/c board and im getting nothing from it. The seller has kindly refunded me. When looking at the motherboard/a board, there appears to be a fried IC chip, a completely missing heat sink and a weird capacitor to eprom solder job going on? So assuming the A board is fried, would that also affect the B/C boards too? Ive ran then all through a working A board abd get nothing from it. All im really trying to figure out is if anything is salvagable....

https://i.postimg.cc/9F4gB8jh/image.jpg

User avatar
yosai
280bpm's too slow
Posts: 3612
Joined: August 17th, 2008, 5:00 pm
Location: London
eBay: yosai

Re: Capcom CPS1 Q

Post by yosai » March 17th, 2019, 10:21 am

I'm assuming this was another crap CPS1 boot from yaton. His quality control is absolutely shocking.

The B/C should work with another motherboard but the fact that it doesn't is not a surprise.

User avatar
Neo'nate
Posts: 410
Joined: August 22nd, 2008, 2:52 pm
Location: London and the SWest
Initials: NJP

Re: Capcom CPS1 Q

Post by Neo'nate » March 17th, 2019, 12:26 pm

:awe: not wrong!

Post Reply