
So that's either Ketsui, DOJ or EspGaluda. None of which need autofire.

Back on topic, I think this is the kind of solution DS is thinking of building.
Indeed. And at 4am, whilst trying to get to sleep (fat chance) I had an epiphany and am pretty sure I can achieve the desired 0.5 second delay also.yosai wrote:Looking good man. That will be slightly more expensive to produce but will reduce hassle significantly, especially if you're autofiring both players and three buttons each.
That's a very nice addition.Devil Soundwave wrote:As a little bonus, I think I might include a switchable voltage inverter on the PCB too for those times when you need -5V and done have it - flick a swithc, instant -5v rail.
If it already has it, then you leave teh switch set to off.cools wrote:What about if the cab already has -5v? Much increased PCB size?
I'll do whatever you guys like - the consensus is teh one to aim for after all.cools wrote:Tell you what would be cool - if you make it in a T shape, rather than flat, so it takes up minimal space in front of the PCB.
Code: Select all
|
_|_
If you get a chance, I wouldn't mind borrowing one of these to prove a pointyosai wrote:Built a clone of emphatics passive autofire circuit and it works alright. RFJ has never been so easy.
The orange wires have spade connectors on the ends and attach in series to the required buttons (max 2)
The green wire connects to GND, and the black wire (not needed) is a longer GND wire.
Pot adjustment ranges from always on to around 30Hz.
Schematic also attached.
Raiden DX, Outzone, Batsugun, Flying Sharktetsujin wrote:Id love one of these for my Japanese Raiden DX - my arm muscles start to ache after about 4 credits and am sure I get fatigue after the 2nd level!