Karnov’s control panel gallery

[geotrig]

You missed a trick. White panel. Pink balltops and large pink dust-washers.

haha that would have been awesome

[SuperPang]

I was actually thinking it would look like a pair of tits but as usual you've all got shaft on the brain.

[emphatic]

I was actually thinking it would look like a pair of tits but as usual you've all got shaft on the brain.

Sure...

[zipper]

Got round to fitting a prototype 3p repro Swing panel from alberto. Drawn by ooyk on Neo-Arcadia. Very well made, like all of alberto’s panels.

[cools]

Not quite a CP directly, but I needed a credit button on my Lindbergh cabinet so I removed the coin reject and fitted a suitable button there:

20200521_231158.jpg

Liked the result so much I found one that fitted the Pony too:

20200521_231247.jpg

No cab or wiring mods done, just connected instead of the normal coin switch.

[monouchi]

Not quite a CP directly, but I needed a credit button on my Lindbergh cabinet so I removed the coin reject and fitted a suitable button there:
20200521_231158.jpg

Liked the result so much I found one that fitted the Pony too:
20200521_231247.jpg

No cab or wiring mods done, just connected instead of the normal coin switch.

Very fitting.

[emphatic]

Looks excellent. Do you have a link to the buttons you've used?

[cools]

And two more fitted to some holes that are in a stock Pony. I did enlarge the holes slightly though

20200522_120519.jpg

Going to wire in as Test and Service I think.

[cools]

Looks excellent. Do you have a link to the buttons you've used?

Theyre all over ebay and amazon if you search the size + stainless/chrome/metal button. These were what i got. I have spare 12mm ones as noone was selling under 5x

https://www.amazon.co.uk/gp/aw/d/B07L4LSXNR
https://www.ebay.co.uk/itm/352853783719

[JoeAwesome]

I tried the button mod for a NAOMI Universal, and failed. Just a heads up to measure the hole, and check it’s not fitted for a security sized bolt.

[8bitforlife]

Got round to fitting a prototype 3p repro Swing panel from alberto. Drawn by ooyk on Neo-Arcadia. Very well made, like all of alberto’s panels.

that looks beautiful well those panels be able to be bought by anyone? The swing im going to trade for only has a 2 panel and ill be needing a 3p or a 4p panel

[nem]

that looks beautiful well those panels be able to be bought by anyone? The swing im going to trade for only has a 2 panel and ill be needing a 3p or a 4p panel

You should PM alberto. He's doing an interest check for them:

viewtopic.php?f=35&t=37094

[8bitforlife]

that looks beautiful well those panels be able to be bought by anyone? The swing im going to trade for only has a 2 panel and ill be needing a 3p or a 4p panel

You should PM alberto. He's doing an interest check for them:

viewtopic.php?f=35&t=37094

funny enough he messaged me that day i posted. i put my name down for 2 pannels.

[supermagoalex]

My Naomicab control panel with spinner and trackball

[Chempop]

My Naomicab control panel with spinner and trackball

Why is the spinner so far away in the top right corner? Did it need more clearance than the control panel or instruction space could provide? Also, is that a motion control sensor too?

[supermagoalex]

Why is the spinner so far away in the top right corner? Did it need more clearance than the control panel or instruction space could provide? Also, is that a motion control sensor too?

Hi,
the right corner was the only place where there is enough depth to install the spinner and his flyweight.
I use the sensor bar with Wiimotes for gun games like House of the Dead, etc...

[matt5cott]

New Net City.

Took my a while to get it "right" In my eyes, but I think I've cracked it.

[emphatic]

The chrome balls looks perfect to me. Very ballsy to post this picture in this thread though.

[Chempop]

Everyone loves a pair of silverballs

DisplayCollapse view

[matt5cott]

Everyone loves a pair of silverballs

DisplayCollapse view

My inspiration, the one on the right of the CP being the deeper and heavily stained from usage of the two.