Afternoon!
I’m starting the journey of transplanting a Nanao MS9 (29SU. I know not a T) back into my E2. Unfortunately the original amp up connector was butchered off courtesy of Flazh (remember him?!) back in the day so I need to sort that out.
I can see from the big Egret 2 wiring schematic that 9 wires go to the AMPUP connector but I can only see 7 being used by the chassis currently in there. The wiring diagram doesn’t help as it looks like the 2 Degaus wires connect to each other? Is that right?!
Any help/photos from anyone with an E2 would be most appreciated.
Edit: had another look at the wiring in the cab on that section and there looks like a pair of green/orange wires that look like they do loop back on themselves, guessing they’re the Degaus wires? Which may answer my question.
Egret 2 Monitor pin out and Degaus Q
-
- Posts: 343
- Joined: December 18th, 2008, 1:09 pm
- Location: South Shields, UK.
Egret 2 Monitor pin out and Degaus Q
Astro City is only a letter away from atrocity. Makes you think doesn’t it?
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Egret 2 Monitor pin out and Degaus Q
Yep, you're correct.
They are for the degauss, and because the T version is auto degauss, the green/orange just loopback on themselves via the pink cable in the pix below, rather than wiring to a press button.
They are for the degauss, and because the T version is auto degauss, the green/orange just loopback on themselves via the pink cable in the pix below, rather than wiring to a press button.
You do not have the required permissions to view the files attached to this post.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
-
- Posts: 343
- Joined: December 18th, 2008, 1:09 pm
- Location: South Shields, UK.
Re: Egret 2 Monitor pin out and Degaus Q
Ah nice one thank you.
So assuming the 29SU chassis doesn’t auto Degaus like the 29T should I not connect those wires up? Or, can I connect it up, break the loop and maybe attach to a button or something to allow for degaussing?
Edit @wigsplitta could you do me a photo of the amp up into the monitor chassis please?
So assuming the 29SU chassis doesn’t auto Degaus like the 29T should I not connect those wires up? Or, can I connect it up, break the loop and maybe attach to a button or something to allow for degaussing?
Edit @wigsplitta could you do me a photo of the amp up into the monitor chassis please?
Astro City is only a letter away from atrocity. Makes you think doesn’t it?
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Egret 2 Monitor pin out and Degaus Q
Here we go
You do not have the required permissions to view the files attached to this post.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
-
- Posts: 343
- Joined: December 18th, 2008, 1:09 pm
- Location: South Shields, UK.
Re: Egret 2 Monitor pin out and Degaus Q
Brill ta.
Astro City is only a letter away from atrocity. Makes you think doesn’t it?