Hello !
This is my first machine of this type so i have a couple of questions that someone hopefully can answer me.
I have included some pics.
1:I have some loose wires under the controlpanel i'm wondering about.1 grouund wire,1 blue and 1 black wire that goes to the middle plug.1 wire from one of the buttons .
2:What kind of tool do i need to remove the back panel of the monitor.
3:Can't seem to find a way to coin up.Trired the microswitch for the cion mech but that didn't work and i can't locate any credit button.
4:I tried to test myvSolar Assault pcb but got no picture.Only sound and a "no signal" message on the monitor.
The previous cabinet i owned only had a standard resolution monitor so i'm not sure why i can't get this to work on this monitor.
All help greatly appreciated
Sega NNC questions
- BentleyBear
- Please Continue...
- Posts: 9
- Joined: June 3rd, 2020, 8:58 pm
- Location: Norway
- eBay: witchdemon
- Initials: MCP
Sega NNC questions
You do not have the required permissions to view the files attached to this post.
- BentleyBear
- Please Continue...
- Posts: 9
- Joined: June 3rd, 2020, 8:58 pm
- Location: Norway
- eBay: witchdemon
- Initials: MCP
Re: Sega NNC questions
More pics
You do not have the required permissions to view the files attached to this post.
- BentleyBear
- Please Continue...
- Posts: 9
- Joined: June 3rd, 2020, 8:58 pm
- Location: Norway
- eBay: witchdemon
- Initials: MCP
Re: Sega NNC questions
I,m currently using a Jammafier setup
You do not have the required permissions to view the files attached to this post.
- meyerli
- Posts: 138
- Joined: February 28th, 2012, 4:06 am
- Location: Lakeside, Switzerland
- eBay: meyerli0
- Initials: MAN
Re: Sega NNC questions
1. I'm not 100% where the cables are going to but looks like button connections. Compare with the layout here: https://wiki.arcadeotaku.com/w/Sega_Naomi_Universal
2. It' a torx with a hole in the middle. (Hope it's called like that in english)
3. You can check on Jamma wiring for a credit button and connect one. I've set all my games to free play.
4. Have you checked if it's a trysinc monitor or maybe high res only?
2. It' a torx with a hole in the middle. (Hope it's called like that in english)
3. You can check on Jamma wiring for a credit button and connect one. I've set all my games to free play.
4. Have you checked if it's a trysinc monitor or maybe high res only?
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Sega NNC questions
You need a T30 safety torx.
You do not have the required permissions to view the files attached to this post.
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Sega NNC questions
Ground cable (the green one)goes in over the kick harness imput. Hook up to hinge on control panel.
The light blue cabel in your pictures is 2 player start om my harness. Black cable should be ground for 2 player start.
Full pinout available at arcade otaku wiki.
The light blue cabel in your pictures is 2 player start om my harness. Black cable should be ground for 2 player start.
Full pinout available at arcade otaku wiki.
You do not have the required permissions to view the files attached to this post.
- Buddyc
- Posts: 114
- Joined: October 5th, 2019, 1:04 am
- Location: Norway
- eBay: haver-san
- Initials: BAD
Re: Sega NNC questions
I also use Invzim’s jammafier in my setup.
A tri sync helper could help, but is this the only PCB with issues?
Do you have any other PCB’s you could try?
More info on the tri sync helper here:
https://irkenlabs.com/jammafier/tri-sync-helper
A tri sync helper could help, but is this the only PCB with issues?
Do you have any other PCB’s you could try?
More info on the tri sync helper here:
https://irkenlabs.com/jammafier/tri-sync-helper
- BentleyBear
- Please Continue...
- Posts: 9
- Joined: June 3rd, 2020, 8:58 pm
- Location: Norway
- eBay: witchdemon
- Initials: MCP
Re: Sega NNC questions
Thanks for all your input.
The monitor i have is the Toshiba PF D29C051.
Was really hoping i could use the Solar Assault pcb with this monitor since the pcb requires a medium res monitor to work.
It only shows "no signal" on the screen.
I have tested a couple of other pcb's and they work fine.
The monitor i have is the Toshiba PF D29C051.
Was really hoping i could use the Solar Assault pcb with this monitor since the pcb requires a medium res monitor to work.
It only shows "no signal" on the screen.
I have tested a couple of other pcb's and they work fine.