Hello all ,
I'd like to know if someone uses or knows the pinout of this Nesica RFID card reader model (K92X0331B with HJST 5/6 pins N1 connector and HJST 5 pins N2 connector) ?
Picture : https://image.noelshack.com/fichiers/20 ... 0147-1.jpg
Thanx.
Nesica RFID card readers K92X0331B pinout
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
- SpinalFeyd
- Posts: 16
- Joined: August 2nd, 2017, 3:55 pm
- Location: The Abandoned City
- eBay: ****
- Initials: CCP
Re: Nesica RFID card readers K92X0331B pinout
N1
PIN 1 +5V
PIN 2 TX
PIN 3 RX
PIN 4 GND
PIN 5 FGND
N2
PIN 1 +5V
PIN 2 NESICA LED -RED-
PIN 3 NESICA LED -GREEN-
PIN 4 NESICA LED -BLUE-
PIN 5 GND
PIN 1 +5V
PIN 2 TX
PIN 3 RX
PIN 4 GND
PIN 5 FGND
N2
PIN 1 +5V
PIN 2 NESICA LED -RED-
PIN 3 NESICA LED -GREEN-
PIN 4 NESICA LED -BLUE-
PIN 5 GND
-
- Posts: 162
- Joined: March 6th, 2013, 5:38 pm
- Location: France
Re: Nesica RFID card readers K92X0331B pinout
Thank you very much !SpinalFeyd wrote: ↑July 11th, 2020, 4:10 am N1
PIN 1 +5V
PIN 2 TX
PIN 3 RX
PIN 4 GND
PIN 5 FGND
N2
PIN 1 +5V
PIN 2 NESICA LED -RED-
PIN 3 NESICA LED -GREEN-
PIN 4 NESICA LED -BLUE-
PIN 5 GND
To rely to a TX3 mobo without any Nesica config, I only need N1 connector. Am I right ?
- SpinalFeyd
- Posts: 16
- Joined: August 2nd, 2017, 3:55 pm
- Location: The Abandoned City
- eBay: ****
- Initials: CCP
Re: Nesica RFID card readers K92X0331B pinout
I guess so.
Ive only used the usb type for TTX3
Ive only used the usb type for TTX3