Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Arcade cabinets, control panels, joysticks, harnesses...
Topics are pruned after 90 days of inactivity.
User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » September 1st, 2019, 11:48 pm

Veuch wrote:
September 1st, 2019, 11:45 MP
No jamma if you mean chewlix... Only original f and c vewlix :awe:
Btw.. If taito could provide one or 2 jamma kits i would definitely go into it =)
Already asked about the JAMMA kits ;) they were sold out months ago.

However, this is a better solution:

https://irkenlabs.com/jammafier/introduction

These will be produced again in the coming months.

Rocco
Posts: 361
Joined: February 7th, 2016, 10:51 pm
Location: Navarra

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Rocco » September 2nd, 2019, 12:05 am

WTF , who would want to play JAMMA PCB’s on Vewlix :wtf:

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » September 2nd, 2019, 12:11 am

Rocco wrote:
September 2nd, 2019, 12:05 am
WTF , who would want to play JAMMA PCB’s on Vewlix :wtf:
Those who don't have 15khz cabs ;)

Veuch
Posts: 3
Joined: August 9th, 2017, 8:21 am
Location: France

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Veuch » September 2nd, 2019, 7:15 am

I have 4 15khzs cabs also :lol:

battlesmurf
Posts: 69
Joined: February 18th, 2012, 7:54 pm
Location:

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by battlesmurf » September 2nd, 2019, 7:16 am

How much luck did you guys have in getting them to attach the overlays? They told me they wouldn't do it anymore.

Veuch
Posts: 3
Joined: August 9th, 2017, 8:21 am
Location: France

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Veuch » September 2nd, 2019, 8:32 am

In Zak we trust 8-)

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » September 4th, 2019, 10:32 am

Image

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » September 4th, 2019, 10:34 am

Now we sit back and wait

(stares at clock for 3 months) :think:

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 7th, 2019, 4:39 pm

4 weeks down. Another 8 weeks to go :thumbup: Hopefully the lead time is shorter than the quoted 90 days.

Veuch
Posts: 3
Joined: August 9th, 2017, 8:21 am
Location: France

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Veuch » October 9th, 2019, 3:58 pm

:awe: please don t forget to ask for assembling my f panels (2 of them) pleeeaaaasssseeeee

:P

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 30th, 2019, 8:33 am

Veuch wrote:
October 9th, 2019, 3:58 MP
:awe: please don t forget to ask for assembling my f panels (2 of them) pleeeaaaasssseeeee

:P
Taito offered panel overlay application in factory. The cost is approximately £45 per panel.

Please let me know if you want your overlay applied to the panel in factory.

They also said that the plates will be ready in 3 weeks.

User avatar
Jan
Enemy of the state of Spain
Posts: 3719
Joined: August 17th, 2008, 7:56 pm
Location: Germany
eBay: voll gerne

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Jan » October 30th, 2019, 10:20 am

i strongly suggest to do that if you have ordered a F overlay, these are transparent, very hard to attach without traces. the L and DIA overlays are very easy to apply.

User avatar
wigsplitta
Savile's alibi
Posts: 1096
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by wigsplitta » October 30th, 2019, 12:14 pm

Zak, add me to the pre-application list please.

Having never applied an overlay before, I could see mine still needing to be applied in 2 years from now! :lolno:

I've seen various pics where a Vewlix overlay has been applied straight, but off by a mil or two which in turn makes the buttons look off centered. 200 quids worth of off centred buttons would probably irk me a little.

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 30th, 2019, 12:19 pm

wigsplitta wrote:
October 30th, 2019, 12:14 MP
Zak, add me to the pre-application list please.

Having never applied an overlay before, I could see mine still needing to be applied in 2 years from now! :lolno:

I've seen various pics where a Vewlix overlay has been applied straight, but off by a mil or two which in turn makes the buttons look off centered. 200 quids worth of off centred buttons would probably irk me a little.
Done ;) First page has everyone's application request (in case I don't MP you directly).

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 30th, 2019, 12:20 pm

Jan wrote:
October 30th, 2019, 10:20 am
i strongly suggest to do that if you have ordered a F overlay, these are transparent, very hard to attach without traces. the L and DIA overlays are very easy to apply.
Nice one. I think I'm going to get my L applied in factory too - at least if Taito screw it up, they can just try again!

User avatar
SuperPang
Master or Universe
Posts: 9890
Joined: August 16th, 2008, 2:45 pm
Location: UK
Contact:

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by SuperPang » October 30th, 2019, 12:52 pm

Yeah, me too please.

g60hot
Posts: 74
Joined: November 11th, 2013, 9:17 pm
Location: Wigan, England
eBay: recycle-squad

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by g60hot » October 30th, 2019, 1:53 pm

Hi Zak, only just managed to get myself back in after managing to lock myself out of my account for the past 2 weeks 🤦‍♂️ Thanks Wigsplitta and Pang 👍

Anyway please can you ask them to apply all my panels too!

Cheers Dude

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 30th, 2019, 1:55 pm

g60hot wrote:
October 30th, 2019, 1:53 MP
Hi Zak, only just managed to get myself back in after managing to lock myself out of my account for the past 2 weeks 🤦‍♂️ Thanks Wigsplitta and Pang 👍

Anyway please can you ask them to apply all my panels too!

Cheers Dude
Will do pal ;) That's almost everyone :awe:

User avatar
Jan
Enemy of the state of Spain
Posts: 3719
Joined: August 17th, 2008, 7:56 pm
Location: Germany
eBay: voll gerne

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by Jan » October 30th, 2019, 2:48 pm

zak wrote:
October 30th, 2019, 12:20 MP
Nice one. I think I'm going to get my L applied in factory too - at least if Taito screw it up, they can just try again!
You can easily remove and re-adjust the overlays, will take a few moments before they stick for good.

User avatar
zak
Posts: 1076
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: Taito (Official) Vewlix 2 Player panel (Europe group order) Closed

Post by zak » October 30th, 2019, 2:55 pm

Jan wrote:
October 30th, 2019, 2:48 MP
zak wrote:
October 30th, 2019, 12:20 MP
Nice one. I think I'm going to get my L applied in factory too - at least if Taito screw it up, they can just try again!
You can easily remove and re-adjust the overlays, will take a few moments before they stick for good.
Did you use soap water? Or just direct to panel?

Post Reply