Volfied PCB problem

PCB problems and fixes
Post Reply
User avatar
mx5dob
Posts: 52
Joined: January 10th, 2019, 12:41 pm
Location: Teesside
eBay: mrpauldobson
Initials: dob

Volfied PCB problem

Post by mx5dob »

Hi all. Just picked up a Volfied PCB from Yahoo auctions. It's supposed to be working fine but I can't get anything on the screen. The sounds works ok, just no image.

I've measured the voltage at one of the chips and it's a steady 5.03v plus ive tried it on my supergun and no joy on that either.

Any ideas?
Paul
User avatar
geotrig
Potato!
Posts: 7506
Joined: December 5th, 2008, 1:14 pm
Location: ._.
eBay: ._.

Re: Volfied PCB problem

Post by geotrig »

Don't some Taito pcbs have issue with video ground but I suppose if it was that you would have something on the screen
Image

<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
User avatar
caius
Posts: 112
Joined: May 24th, 2013, 11:55 am
Location: Italy
eBay: private
Initials: FAB

Re: Volfied PCB problem

Post by caius »

The problem is obviously related to the 'TC0070RGB' modul,e most likely it got detached.But you already know this ;)
Awbacon
Please Continue...
Posts: 824
Joined: February 22nd, 2018, 4:35 am
Location: Chicago
eBay: Awbacon
Initials: Aeb

Re: Volfied PCB problem

Post by Awbacon »

Have you checked continuity between chips and the video output area? Sounds like something clearly isn't 'moving"

Could be a cold joint somewhere that cracked during shipping
User avatar
dingsbums
The bead-o empire
Posts: 238
Joined: June 26th, 2009, 10:38 am
Location: Germany

Re: Volfied PCB problem

Post by dingsbums »

Your Power Supply has - 5Volt ? Volfied needs it.
Post Reply