Arcade cabinets, control panels, joysticks, harnesses...
Topics are pruned after 90 days of inactivity.
-
zak
- Posts: 895
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Post
by zak » September 6th, 2019, 12:10 pm
Hi all,
A lot of folks have been asking for these over the "Fast I/O":
JVS I/O: K9101262B JVS L P.C.B. ASSY @JPY19800
Doing another group order in 2 months for these. Please reply to this thread with the quantity you want. Not taking payment until they are in production.
g60hot - x7
zak - x1
monstermug - x1
Ikaru - x1
SuperPang - x1
Kevin2me - x1
Last edited by
zak on September 11th, 2019, 4:03 pm, edited 4 times in total.
-
Ikaru
- Posts: 52
- Joined: April 11th, 2019, 7:34 pm
- Location: FRANCE
- eBay: a.ben-49
- Initials: Ika
Post
by Ikaru » September 6th, 2019, 12:40 pm
Please One for me Zak
-
SuperPang
- Master or Universe
- Posts: 9694
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
-
Contact:
Post
by SuperPang » September 6th, 2019, 12:58 pm
Yes please sir.
Still not clear on whether the Dia Blacks come with the required loom but I guess we'll find out.
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 6th, 2019, 5:33 pm
-
SuperPang
- Master or Universe
- Posts: 9694
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
-
Contact:
Post
by SuperPang » September 6th, 2019, 5:40 pm
Post that scan, Jan!
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 6th, 2019, 5:43 pm
stubborn Brits...
Last edited by
Jan on September 6th, 2019, 6:14 pm, edited 2 times in total.
-
markedkiller78
- Pony fucker
- Posts: 7307
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Post
by markedkiller78 » September 6th, 2019, 5:58 pm
Do they? I missed it along the way
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 6th, 2019, 6:14 pm
http://2611.eu/diablack.pdf
maybe someone can splitt it and put it on wiki
-
SuperPang
- Master or Universe
- Posts: 9694
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
-
Contact:
Post
by SuperPang » September 6th, 2019, 6:37 pm
Does the loom on the left come with the cab, the I/O or is it an entirely different part, is my question?
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 6th, 2019, 6:47 pm
i know what you mean. Mine did not come with that loom (bought new).
Ask Yugo if it is included with the Cab.
-
kevin2me
- Posts: 82
- Joined: May 1st, 2011, 4:48 pm
- Location: Cork, Ireland
- eBay: kevin2me2
Post
by kevin2me » September 7th, 2019, 10:56 am
Zak Put me down for one please too.
Is this simply switch out my Vewlix Ls Fast IO with this.
FastIO CP loom can be used with this too I suppose.
And it has a 4 pin connector with 2 wires yellow black to power FastIO or this new Taito JVS IO I presume. If so Naomi would work perfect.
Thanks Kev You might email me nearer the time. Kevin2me gmail
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 7th, 2019, 11:26 am
FastIO CP loom can be used with this too I suppose.
Yes, plug&play replacement
-
kevin2me
- Posts: 82
- Joined: May 1st, 2011, 4:48 pm
- Location: Cork, Ireland
- eBay: kevin2me2
Post
by kevin2me » September 7th, 2019, 12:10 pm
Sweet. Bring on the long boat to china wait now lol
Put me down for one for sure Zak.
I can see me going hum Let's get a second vexlix down the line lol Diamond be nicer than L. 1080p screen and no fans on screen. Dam the fans on the L are load and unnecessary lol
Thanks Zak and Jan
-
yuroism
- Posts: 7
- Joined: December 29th, 2018, 2:04 am
- Location: San Francisco
- eBay: yuroism
Post
by yuroism » September 9th, 2019, 4:02 am
Mind shipping one to the US? If so, count me in for one.
-
slugflyer
- Posts: 268
- Joined: February 8th, 2011, 9:28 pm
- Location: London
Post
by slugflyer » September 9th, 2019, 6:00 am
Hi there,
Does anyone know of any issue of this working on a stock vewlix C edition? Should be the same, right?
-
zak
- Posts: 895
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Post
by zak » September 9th, 2019, 9:09 am
yuroism wrote: ↑September 9th, 2019, 4:02 am
Mind shipping one to the US? If so, count me in for one.
I suspect that there will be a simultaneous group order for the US, when production starts again.
-
zak
- Posts: 895
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Post
by zak » September 9th, 2019, 9:11 am
slugflyer wrote: ↑September 9th, 2019, 6:00 am
Hi there,
Does anyone know of any issue of this working on a stock vewlix C edition? Should be the same, right?
I don't have the answer, but this chart says that the Capcom Viewlix already had the standard JVS I/O from factory.
https://wiki.arcadeotaku.com/images/4/4 ... Vewlix.jpg
-
Jan
- “Egrets, I’ve had a few...”
- Posts: 3582
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Post
by Jan » September 9th, 2019, 9:23 am
slugflyer wrote: ↑September 9th, 2019, 6:00 am
Hi there,
Does anyone know of any issue of this working on a stock vewlix C edition? Should be the same, right?
yes, same.
-
slugflyer
- Posts: 268
- Joined: February 8th, 2011, 9:28 pm
- Location: London
Post
by slugflyer » September 9th, 2019, 12:56 pm
One day, I will hire someone to help me understand my vewlix. Thanks for the help!
-
Bigsingerdawg
- Posts: 2
- Joined: May 24th, 2018, 1:23 pm
- Location: Canada
- eBay: Bigsingerdawg
- Initials: Mdw
Post
by Bigsingerdawg » September 11th, 2019, 6:09 am
Same question about shipping 1 to canadia.
