SEGA Lindbergh Black Screen LAN Blink
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
SEGA Lindbergh Black Screen LAN Blink
Hi guys.
Recently I've got a SEGA Lindbergh yellow versión.
So when I turn it on I get black screen , no video output.
Any suggestions?
Thanks
Recently I've got a SEGA Lindbergh yellow versión.
So when I turn it on I get black screen , no video output.
Any suggestions?
Thanks
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: SEGA Lindbergh Black Screen LAN Blink
Did you try the DVI connector? I seem to remember that's the one you need to use.
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
try reseating ram and cpu
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
like you do with any pc motherboard
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
Hi there. I've tried to reseat graphics card and ram and change them , but anything happens.
Black screen
So how can I test CPU ?
Is it possible use other one?
PS : see last image , I can't remove CPU it seems like solder on heatsink
I've already checked Power supply it works great.
Other thing that I've check head drive isn't spinning. It seems like Turn off. I've replaced it but same result.
Black screen
So how can I test CPU ?
Is it possible use other one?
PS : see last image , I can't remove CPU it seems like solder on heatsink
I've already checked Power supply it works great.
Other thing that I've check head drive isn't spinning. It seems like Turn off. I've replaced it but same result.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
to remove the cpu, take a blade and angle it between the edge of cpu and heat sink and then whack it gently but firmly with a small hammer- the cpu will drop off
clean away old heat compound with contact cleaner and reseat cpu making sure all legs are straight and put on some new heat compound
clean away old heat compound with contact cleaner and reseat cpu making sure all legs are straight and put on some new heat compound
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
I got it. But same result.grantspain wrote: ↑July 15th, 2019, 8:44 pm to remove the cpu, take a blade and angle it between the edge of cpu and heat sink and then whack it gently but firmly with a small hammer- the cpu will drop off
clean away old heat compound with contact cleaner and reseat cpu making sure all legs are straight and put on some new heat compound
Maybe CPU Burned??
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
do you have a atx power supply you can try, use the 24 pin connector only for the atx supply- disconnect both lindbergh psu connectors
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
Yes I have.grantspain wrote: ↑July 15th, 2019, 9:45 pm do you have a atx power supply you can try, use the 24 pin connector only for the atx supply- disconnect both lindbergh psu connectors
Now I'm using Lindbergh Official power supply.
I will try ATX power Supply now!
Edit : Works!!!!
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
i would suggest you get a full range high quality 700w atx supply and make some adapter for it to run in the cab
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
Many thanks. Bro I'll get your advice.grantspain wrote: ↑July 16th, 2019, 7:12 am i would suggest you get a full range high quality 700w atx supply and make some adapter for it to run in the cab
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
I have a question bro. Why this Power supply doesn't have power enough to boot it correctly?? Maybe old ??
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: SEGA Lindbergh Black Screen LAN Blink
the lindbergh psu?
they just go faulty, bloody rubbish imo
they just go faulty, bloody rubbish imo
- gnomx
- Please Continue...
- Posts: 196
- Joined: October 8th, 2013, 9:12 pm
- Location: 26
- eBay: Cuccion
- Initials: DED
- Contact:
Re: SEGA Lindbergh Black Screen LAN Blink
Ah ok. Many thanks dude.grantspain wrote: ↑July 16th, 2019, 12:57 pm the lindbergh psu?
they just go faulty, bloody rubbish imo
Thanks for all things