Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

PCB problems and fixes
Post Reply
User avatar
gnomx
Posts: 196
Joined: October 8th, 2013, 9:12 pm
Location: 26
eBay: Cuccion
Initials: DED
Contact:

Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

Post by gnomx »

Hi guys.
I have a problem with thoose Naomi Game.

Naomi 2 virtua striker 3 got error 01. I've cleaned connectors and pcb but no lucky.

Naomi 1 Royal Rumble The game is recognised from naomi board but i got black screen. I've tried to make a board rom test but naomi test menu didn't start and after that reboots to Main screen. Same story, cleaned everything.

Any help??
User avatar
JoeAwesome
Posts: 39
Joined: February 4th, 2019, 5:02 pm
Location: TX
eBay: joeawesome
Initials: JOE

Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

Post by JoeAwesome »

All the voltages look good under load?
User avatar
gnomx
Posts: 196
Joined: October 8th, 2013, 9:12 pm
Location: 26
eBay: Cuccion
Initials: DED
Contact:

Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

Post by gnomx »

JoeAwesome wrote: June 25th, 2019, 5:53 pm All the voltages look good under load?
Bro. Tell me where I have musure voltage... Behind connectors?
User avatar
JoeAwesome
Posts: 39
Joined: February 4th, 2019, 5:02 pm
Location: TX
eBay: joeawesome
Initials: JOE

Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

Post by JoeAwesome »

Back of the motherboard with the PSU plugged in and powered on. From the picture, it's CN1.
You do not have the required permissions to view the files attached to this post.
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Naomi 1 Game Royal Rumble / Virtua striker 3 Issues

Post by nem »

I don't know why but I had to run Royal Rumble at 5.15V to work, otherwise it boots to a black screen. Every other cart works fine at 5.00V.

Try giving it some more juice.
Post Reply