Super neo 29 Hitachi horizontal non linearity

For monitor related issues
Post Reply
User avatar
SaikyoNoTora
Please Continue...
Posts: 4
Joined: May 25th, 2019, 6:04 pm
Location: Italia
eBay: bushi82jutaijutsu
Initials: SNT

Super neo 29 Hitachi horizontal non linearity

Post by SaikyoNoTora »

hi everyone, my hitachi monitor suffers from a horizontal non-linearity problem. The left side of the screen is larger and the right side is smaller. I can't find a command on the panel to adjust the horizontal linearity. Has it ever happened to anyone? Image
User avatar
mukurop
Posts: 109
Joined: September 19th, 2008, 11:00 pm
Location: Italy
eBay: mukuro_w

Re: Super neo 29 Hitachi horizontal non linearity

Post by mukurop »

May I Know What's your tube-chassis combo? If it is the original one you should have an hitachi A68lLFP27X tube + hitachi GMK-29FS3, on this chassis there isn't a linearity control pot although I have never seen this problem and I have seen many of these cabs... Maybe the tube or the chassis was swapped with an incorrect one. If its not the case then you should have an incorrect value on few caps.
seikenflyer
Please Continue...
Posts: 1
Joined: July 24th, 2019, 12:43 am
Location: Brazil
eBay: sonofmail18
Initials: MAI

Re: Super neo 29 Hitachi horizontal non linearity

Post by seikenflyer »

Is there another chassis compatible with the hitachi A68lLFP27X tube? I dont have the GMK-29FS3, and the chassis i have (Eletrocyan and Wei-ya 829H) dont work with it. Thank you.
User avatar
mukurop
Posts: 109
Joined: September 19th, 2008, 11:00 pm
Location: Italy
eBay: mukuro_w

Re: Super neo 29 Hitachi horizontal non linearity

Post by mukurop »

The ms9-29 should work , just make an adapter for yoke and rgb+ac
Post Reply