Wei-Ya C31291A / samsung a68kvl74x02
-
- Posts: 34
- Joined: November 18th, 2018, 5:26 pm
- Location: Costa Rica
- eBay: jaczeld
- Initials: DJV
Wei-Ya C31291A / samsung a68kvl74x02
Hi,
I have this OK Baby cabinet. It came with a samsung a68kvl74x02 tube. By checking online, this tube support trisync using a C31291A Chassis, which is in longer in production. Also, I read that some astro city cabinets were shipped with that tube, nevertheless it doesn't mention what kind of chassis... i can't picture a sega oem cabinet with a wei-ya chassis.
Having said that, does anybody know a suitable chassis for this tube, or anybody has a spare c3129ia and is willing to sell it?
Thanks!
I have this OK Baby cabinet. It came with a samsung a68kvl74x02 tube. By checking online, this tube support trisync using a C31291A Chassis, which is in longer in production. Also, I read that some astro city cabinets were shipped with that tube, nevertheless it doesn't mention what kind of chassis... i can't picture a sega oem cabinet with a wei-ya chassis.
Having said that, does anybody know a suitable chassis for this tube, or anybody has a spare c3129ia and is willing to sell it?
Thanks!
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Wei-Ya C31291A / samsung a68kvl74x02
i thought ok baby had rodotron 288 chassis fitted, in any case you need to read the yoke impedance and inductance to get an accurate match
-
- Posts: 34
- Joined: November 18th, 2018, 5:26 pm
- Location: Costa Rica
- eBay: jaczeld
- Initials: DJV
Re: Wei-Ya C31291A / samsung a68kvl74x02
V yellow/green returns between 7.8 and 7.9 ohmgrantspain wrote: ↑April 3rd, 2019, 8:54 am i thought ok baby had rodotron 288 chassis fitted, in any case you need to read the yoke impedance and inductance to get an accurate match
H red/blue returns 1.1 and 1.4 ohm
Not sure how to measure the other thing.
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Wei-Ya C31291A / samsung a68kvl74x02
you would need an inductance meter
-
- Posts: 34
- Joined: November 18th, 2018, 5:26 pm
- Location: Costa Rica
- eBay: jaczeld
- Initials: DJV
Re: Wei-Ya C31291A / samsung a68kvl74x02
I guess this should do the trick
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: Wei-Ya C31291A / samsung a68kvl74x02
Uni-T 603 from Ali Express or Ebay or perhaps Amazon does the job as well. Or some cheaper ones like $25 models. Search for LCR meter to get more hits..
-
- Please Continue...
- Posts: 1
- Joined: May 12th, 2019, 8:01 am
- Location: Costa Rica
- eBay: hexplus506
Re: Wei-Ya C31291A / samsung a68kvl74x02
Hi, I also have a Samsung a68kvl74x02.
Hackcell, did you find an alternative chassis for it? Thank you!
Hackcell, did you find an alternative chassis for it? Thank you!
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: Wei-Ya C31291A / samsung a68kvl74x02
Tube sticker says nothing about the yoke on the tube. You'll need an LCR meter to better measure the yoke values and find a chassis to match those.
- mukurop
- Posts: 109
- Joined: September 19th, 2008, 11:00 pm
- Location: Italy
- eBay: mukuro_w
Re: Wei-Ya C31291A / samsung a68kvl74x02
I Have a Samsung tube A68kvLX01 with a sanwa pm 1745c chassis, this tube - yoke works well with Nanao ms9 chassis and also have same ms9 Toshiba tube curvatur. On my yoke the horizontal inductance is 0.400mh
The A68kvlX02 shoud be the same but with bonded yoke. You need to test the yoke inductance to be sure.
The A68kvlX02 shoud be the same but with bonded yoke. You need to test the yoke inductance to be sure.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: Wei-Ya C31291A / samsung a68kvl74x02
I think that's incorrect. A68KVL74X01 is a Samsung CRT for standard TVs (not 100Hz) and 15KHz arcade monitors. Accordingly, the line coil is well above 1.0mH. Here's a snapshot from an Intervideo manual:
It wouldn't work with a MS9 chassis which requires a 0.300mH line coil. Also I'm pretty sure the curvature is the kind that matches a Naomi bezel for Sanwa 21E31S, a Blast City, Windy II but not an Astro City or an Egret II. I've found it in quite a few TVs and if they had been a perfect match for MS9 I would have kept them.
It wouldn't work with a MS9 chassis which requires a 0.300mH line coil. Also I'm pretty sure the curvature is the kind that matches a Naomi bezel for Sanwa 21E31S, a Blast City, Windy II but not an Astro City or an Egret II. I've found it in quite a few TVs and if they had been a perfect match for MS9 I would have kept them.
You do not have the required permissions to view the files attached to this post.
- mukurop
- Posts: 109
- Joined: September 19th, 2008, 11:00 pm
- Location: Italy
- eBay: mukuro_w
Re: Wei-Ya C31291A / samsung a68kvl74x02
As you can see it is a sanwa pm1745 15/24Kz the tube is Samsung and this yoke-tube setup work well with ms9 alhtough with some pcb you must play with H.limit to fill the screen horizontally.
Here some photos of the monitor.
The tube have the same curvature as nanao ms8/9 A68JUA68X and the yoke rvalues very close.
Here some photos of the monitor.
The tube have the same curvature as nanao ms8/9 A68JUA68X and the yoke rvalues very close.
You do not have the required permissions to view the files attached to this post.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: Wei-Ya C31291A / samsung a68kvl74x02
Yole swap is likely.
- mukurop
- Posts: 109
- Joined: September 19th, 2008, 11:00 pm
- Location: Italy
- eBay: mukuro_w
Re: Wei-Ya C31291A / samsung a68kvl74x02
Nope this tube is labeled as 27Z21C Sega Enterprise assy.
- atro
- Posts: 61
- Joined: April 3rd, 2016, 9:20 pm
- Location: Portugal
- eBay: atro.pt
- Initials: RB
Re: Wei-Ya C31291A / samsung a68kvl74x02
necro bump.
I confirm that this Samsung tube works with a Nanao MS9 (a68kvl74x01). I have one running an MS9 since forever.
Took it out of a Le Mans 24H, paired with a Sanwa PM1745 which was as dead as Elvis.
Now that I was looking online for matching tubes for this Sanwa chassis, I found this thread.
Only thing that I needed to do in order to apply an MS9, was to snap in half the yoke connector and swap the other half with a smaller gauge terminal.
@princessprinprin: which intervideo chassis is that? Vp280 series?
I confirm that this Samsung tube works with a Nanao MS9 (a68kvl74x01). I have one running an MS9 since forever.
Took it out of a Le Mans 24H, paired with a Sanwa PM1745 which was as dead as Elvis.
Now that I was looking online for matching tubes for this Sanwa chassis, I found this thread.
Only thing that I needed to do in order to apply an MS9, was to snap in half the yoke connector and swap the other half with a smaller gauge terminal.
@princessprinprin: which intervideo chassis is that? Vp280 series?
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: Wei-Ya C31291A / samsung a68kvl74x02
So, what is the tube that is compatible with the MS9 chassis? samsung a68kvl74x01 or a68kvl74x02 ???
According to what has been posted here, the a68kvl74x02 might work by swapping the yoke but the curvature is not the same, then a68kvl74x01 is a straight swap, is this correct?
According to what has been posted here, the a68kvl74x02 might work by swapping the yoke but the curvature is not the same, then a68kvl74x01 is a straight swap, is this correct?