Jamma PCB in JVS cabinet (Jammafier)

Business sales and auction links.
Topics are pruned after 90 days of inactivity.
User avatar
cools
Armed Police Buttrider
Posts: 12526
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by cools » January 7th, 2019, 12:00 pm

Image
Image

MDK
Posts: 24
Joined: April 10th, 2011, 9:58 pm
Location: Leeds, UK

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by MDK » January 7th, 2019, 8:34 pm

damn, now I need orig Windy!

User avatar
wigsplitta
Savile's alibi
Posts: 1041
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by wigsplitta » February 4th, 2019, 7:48 pm

Free bump for an unshop'd colour combo update :awe:
IMG_8283.jpg
The Jammafier was pressure tested by our very own resident WUDP expert Pubjoe :fastlove: and we were unable to experience any lag (video AND controls), after a good few hours of SSF2X, witha Franco loom linking cabs.
I have no hesitation in recommending the Invzim Jammafier to anyone missing their Jamma to JVS adaptor... 8-)

User avatar
invzim
Posts: 471
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by invzim » February 11th, 2019, 1:13 pm

Units in stock! I plan to have these available on an on+going basis, but no guarantees.

Get yours here:

https://irkenlabs.com/store/products

User avatar
JimPansenmann
Posts: 27
Joined: March 17th, 2017, 9:54 pm
Location: Germany

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by JimPansenmann » March 10th, 2019, 7:55 am

Received mine this week.
Awesome hardware.

Thanks for that.

Tom

8bitforlife
Posts: 16
Joined: March 27th, 2018, 6:28 am
Location: Kapaa Kauai Hawaii
eBay: Emulat0r
Initials: RB.

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by 8bitforlife » March 11th, 2019, 1:50 pm

I got one awhile ago I recommend it highly

LordBuru
Posts: 9
Joined: September 26th, 2018, 2:48 pm
Location: Canada
eBay: lordsxo
Initials: CRR

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by LordBuru » April 2nd, 2019, 4:00 pm

I received mine last night works really well on my New Net City. Really good workmanship and quality. I tried a CPS1 board, and Snow Brothers and a Pandora's box. It's nice to utilize that one for Jamma, this is almost a must for anyone with only one cab that is JVS.

On another note, I can't figure out the Tri-Sync Helper at all, when used, it seems to dim the image, and everything is fine with out it. It doesn't seem to do anything else.

User avatar
wigsplitta
Savile's alibi
Posts: 1041
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by wigsplitta » April 3rd, 2019, 10:48 am

LordBuru wrote:
April 2nd, 2019, 4:00 MP
On another note, I can't figure out the Tri-Sync Helper at all, when used, it seems to dim the image, and everything is fine with out it. It doesn't seem to do anything else.
I beleive the TSH brings the JAMMA/RGB and VGA signals to a similar level, and saves having to re-adjust brightness/contrast when swapping between JVS and JAMMA games. The Sammy Atomiswave is a good example. If you take the video from the Jammafier through the JAMMA connection without a TSH, you'll see that the picture is incredibly bright compared to when it's plugged directly into the onboard VGA port. Likewise, swapping between CPS2 and Naomi games is big difference. Once the TSH is added in, the brightness levels become very similar, so there's no need to make adjustments.

Here's an overview of exactly what it does from invzim's site
https://irkenlabs.com/jammafier/tri-sync-helper

User avatar
invzim
Posts: 471
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by invzim » April 3rd, 2019, 7:31 pm

wigsplitta wrote:
April 3rd, 2019, 10:48 am
LordBuru wrote:
April 2nd, 2019, 4:00 MP
On another note, I can't figure out the Tri-Sync Helper at all, when used, it seems to dim the image, and everything is fine with out it. It doesn't seem to do anything else.
I beleive the TSH brings the JAMMA/RGB and VGA signals to a similar level, and saves having to re-adjust brightness/contrast when swapping between JVS and JAMMA games. The Sammy Atomiswave is a good example. If you take the video from the Jammafier through the JAMMA connection without a TSH, you'll see that the picture is incredibly bright compared to when it's plugged directly into the onboard VGA port. Likewise, swapping between CPS2 and Naomi games is big difference. Once the TSH is added in, the brightness levels become very similar, so there's no need to make adjustments.

Here's an overview of exactly what it does from invzim's site
https://irkenlabs.com/jammafier/tri-sync-helper
+1, what he said :awe:

User avatar
invzim
Posts: 471
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: Jamma PCB in JVS cabinet (Jammafier)

Post by invzim » May 13th, 2019, 10:54 am

New version of the Tri-Sync Helper, now with a toggle switch to output either CSYNC or H/V sync - this should take care of all sync issues with all combinations of chassis and games. There was one issue with Sanwa PFX (KW0606 chassis) and CPS2 where the monitor for some didn't output a stable picture unless it received CSYNC.

https://irkenlabs.com/jammafier/tri-sync-helper

Post Reply