Martin knows where I live so UK based delivery will be fine too. If I don't have any luck with that, I might open it up to European orders.
Vewlix C
£1500 with Type X2 included
£1250 without SOLD
This came through the recent g60hot container group buy, and was bought by me with the sole intention of selling it on after i'd swapped the monitor.
To confirm, the VGA port DOES NOT WORK on this cabinet so it is DVI only. Everything else is working nicely, having been checked out by g60hot a couple of weeks back.
It's got a yellowing/sooty appearance on the screen in places that is normal for these monitors. I was thinking of trying to clean it, but never plucked up the courage. Only visible on blank/white screens
In light of the above monitor swap, I'm reducing the price to £1250, OR adding a fully working Taito Type X2 fast IO setup into it, and keeping the price as the same as I paid for it.

Comes with marquee holder, not pictured.
Missing the coinbox lock
Does not come with a stepdown
Does not come with any illegal games

Free Nesica (Blazblue) Card as a handy way of testing the RFID card reader is working ok in the future if any updates are made
Self made power cable from the Fast IO --> RFID as it was missing
Windy 1
£900 ON HOLD
Clearly visible Battrider burn to tube (screen curvature same as E2/Ac/NAC... so can easily be replace)
Geometry is ok, convergance could do with some tweaking, as could the colours and contrast
Scuffs and scratches, general wear and tear. One of the sides has a fairly large scratch
Internal cabling all good, only a three button setup. I've added a home made amp as it was originally missing
Original control panel, but has some rust and a bit of damage. Instruction strip has some scuff marks too
Missing CP locks, all other are populated with replacement locks/keys
Comes with Repro 1P Alberto panel from a few years back - Colours are way off, based on a file shared a while back. Quality is top notch, as anyone who knows Alberto's work can confirm. NAC
£400 (no monitor or chassis) SOLD
Fully working as of one week ago, when I swapped it out for a different cab. I have removed the monitor and chassis, and will be keeping them as spares.
Cab is in nice condition overall - it has bumps/scratches, but it has been in use in peoples houses over the last three owners, and has been treated well.
No cracks on the bodywork.
Speaker pod and two of the from doors were repainted before I got it.
Internal wiring is complete, apart from the CPS2 kick harness connector and 6 button connectors.
Original locks. Comes with a FrancoB marquee
SOLD:
Egret II
£900 SOLD
Medium burn to tube, but hard to distinguish anything, unlike the W1 below that less overall burn, but much more specific.
Convergence and Geometry are good, and colours/contrast great.
Scuffs and scratches, general wear and tear. Coin chute got bent on way into the original owners house a few years back, but I've starightened it out to work.
Repro (faded) 1P panel, with 6 button wiring and Negatron jamma adaptor.
Repro intruction strip
Coin box and CP locks missing
Back door panel is include, was taken off in pics to get my Saturn in (not included

Comes with (Euro style) stepdown transformer