The IGS PGM thread
- Paulie
- Opens wallet, moths fly out
- Posts: 2599
- Joined: September 28th, 2011, 5:43 pm
- Location: East Ardsley, West Yorks
- eBay: retro-paulie
- Initials: PSG
Re: The IGS PGM thread
Maybe try OL2 for PGM2? it's much prettier.
- Cell247
- Posts: 298
- Joined: December 7th, 2008, 10:42 pm
- Location: Austin Tx
- eBay: Cell247
Re: The IGS PGM thread
I know the conversions carts are frowned on but I have a question about them. I saw an older sales thread where a Ketsui cart was being sold with a "voltage mod'. I was told:
I haven't read about this anywhere else. Can anyone give me some more info on this?If I Remember well the original cartridge works With flash rom that works at 5v
When you make a ketsui you have to use flash rom at 3.3v and you need a mod to change the 5v linea in a 3.3v line
If you have a cartridge made by arcademodbios they didn't do this mod, this means that you're cartridge will die.
Last edited by Cell247 on November 8th, 2016, 3:10 am, edited 1 time in total.
Wanted: Vewlix L 1p control panel
- Stompp
- Posts: 732
- Joined: July 10th, 2012, 10:58 am
- Location: Stockholm, Sweden
- eBay: uridium
- Initials: DAD
- Contact:
Re: The IGS PGM thread
That 3.3 V for the Ketsui cart was news to me too. Also curious about this now
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: The IGS PGM thread
Me too, I have a AMB cart.Stompp wrote:That 3.3 V for the Ketsui cart was news to me too. Also curious about this now
- SuperPang
- Master or universe
- Posts: 11025
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: The IGS PGM thread
Ahahaha. I hope this is true.Cell247 wrote: If you have a cartridge made by arcademodbios they didn't do this mod, this means that you're cartridge will die.
- jugemscloud
- Monster Basher
- Posts: 351
- Joined: November 6th, 2009, 9:47 pm
- Location: glasgow
Re: The IGS PGM thread
i take it thats the same for the doj and galudas as well, i have a lend of them from a friend at the minute better let him know. i joking said to him (the owner) once that AMB probably didn't care about the solvent content of his spunk glue that he loves to douse things in and would probably corrode the boards to some extend as wellCell247 wrote:I know the conversions carts are frowned on but I have a question about them. I saw an older sales thread where a Ketsui cart was being sold with a "voltage mod'. I was told:
I haven't read about this anywhere else. Can anyone give me some more info on this?If I Remember well the original cartridge works With flash rom that works at 5v
When you make a ketsui you have to use flash rom at 3.3v and you need a mod to change the 5v linea in a 3.3v line
If you have a cartridge made by arcademodbios they didn't do this mod, this means that you're cartridge will die.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: The IGS PGM thread
I'll just bump this old thing to get the experts opinion.
Does anybody know why is there a Capcom logo on the DDP2 POP?
https://servimg.com/view/13718317/391
I don't get it.
Does anybody know why is there a Capcom logo on the DDP2 POP?
https://servimg.com/view/13718317/391
I don't get it.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: The IGS PGM thread
Capcom published it in Japan?
Just guessing, no real knowledge on the matter.
Just guessing, no real knowledge on the matter.
- RMRM
- Posts: 514
- Joined: April 20th, 2013, 4:45 pm
- Location: Portugal
Re: The IGS PGM thread
- ChillingGod
- Please Continue...
- Posts: 31
- Joined: July 11th, 2016, 7:03 pm
- Location: Germany
- eBay: disruptikk
- Initials: SEB
Re: The IGS PGM thread
I know that Demon Front, Eps and SVG had a release on Cartridge and on PCB. Are there other PGM games with a release on a single board?
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: The IGS PGM thread
You could kind of include DodonPachi Daioujou, Espgaluda, and Ketsui. They are games by Cave, but released on a IGS PGM singleboard (though not on legit cart.. only bootleg/modded)ChillingGod wrote: ↑July 22nd, 2019, 2:52 pm I know that Demon Front, Eps and SVG had a release on Cartridge and on PCB. Are there other PGM games with a release on a single board?
- Santashiva
- Posts: 50
- Joined: June 22nd, 2014, 11:31 am
- Location: Lille , France
- ChillingGod
- Please Continue...
- Posts: 31
- Joined: July 11th, 2016, 7:03 pm
- Location: Germany
- eBay: disruptikk
- Initials: SEB
Re: The IGS PGM thread
Interesting. Every PCB Version has his own, individual Board-Layout.
-
- Posts: 4
- Joined: October 20th, 2011, 5:11 pm
- Location: los angeles, CA
Re: The IGS PGM thread
Does anyone have a clear scan of the moves strip for Knights of Valour 3? Finally got this game and would be nice to know all the moves for the characters in the game, thanks!
-
- Please Continue...
- Posts: 16
- Joined: June 16th, 2013, 9:44 am
- Location: France
- eBay: capcom4all