Taito Egret 3 Original PSU Conectors Type...
- Dhampird
- Posts: 51
- Joined: January 3rd, 2012, 8:00 pm
- Location:
Taito Egret 3 Original PSU Conectors Type...
Hello, i get 2 Taito Egret 3 Original PSU made by Taito, on mine Egret3 i have original Weiya PSU and different conectors, Taito PSU needs different conectors, i´m thinking in build an adapter to conect from Weiya conectors (in jamma) to Taito Egret3 Original PSU conectors. Problem = i need to know which type of conectors are, in Weiya i didnt find nothing grabbed in conectors but in Taito original PSU i can read "L JST"
if anyone knows which type of conectors i need please let me know, here a sample:
if anyone knows which type of conectors i need please let me know, here a sample:
- neokoen
- Posts: 270
- Joined: August 24th, 2008, 10:03 am
- Location: schizofrenia (a.k.a. Belgium)
Re: Taito Egret 3 Original PSU Conectors Type...
Been a while but I think the connector type on the Wei Ya PSU is Molex Mini-Fit Jr.
- Dhampird
- Posts: 51
- Joined: January 3rd, 2012, 8:00 pm
- Location:
Re: Taito Egret 3 Original PSU Conectors Type...
Hello, thanks for reply, it seems you´re right about weiya conectors:
https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn
https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn
Now i need to discover the Taito´s PSU type.
https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn
https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn
Now i need to discover the Taito´s PSU type.
- neokoen
- Posts: 270
- Joined: August 24th, 2008, 10:03 am
- Location: schizofrenia (a.k.a. Belgium)
Re: Taito Egret 3 Original PSU Conectors Type...
I think the connectors on the Taito PSU are JST XL type, but obviously can't be sure.
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: Taito Egret 3 Original PSU Conectors Type...
Taito is always JST, but junk wei-ya maybe molex
Arcade's nice when done well
- Dhampird
- Posts: 51
- Joined: January 3rd, 2012, 8:00 pm
- Location:
- radiantsvgun
- Please Continue...
- Posts: 264
- Joined: January 13th, 2009, 9:20 pm
- Location: Georgia, USA
- eBay: Radiantsvgun
- Initials: RIC
Re: Taito Egret 3 Original PSU Conectors Type...
Looks great! Can you advise which connectors you used?
- Dhampird
- Posts: 51
- Joined: January 3rd, 2012, 8:00 pm
- Location:
- radiantsvgun
- Please Continue...
- Posts: 264
- Joined: January 13th, 2009, 9:20 pm
- Location: Georgia, USA
- eBay: Radiantsvgun
- Initials: RIC
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Taito Egret 3 Original PSU Conectors Type...
Well done Dhampird.
I also need to fix this.
I also need to fix this.
- Dhampird
- Posts: 51
- Joined: January 3rd, 2012, 8:00 pm
- Location:
Re: Taito Egret 3 Original PSU Conectors Type...
Hi monouchi and thanks...i think is a good option get Taito Original PSU for Taito Egret 3 and stop use Weiya original PSU, or use Weiya always with 105V to 110v not much, if not...problems can happen with different jamma board, the Weiya PSU tolerance +-15% should work ok at 115V but people recommend for that PSU always 105V or similar, **** tolerance. Taito PSU Egret 3 is better always with tolerance.
-
- Posts: 291
- Joined: November 19th, 2008, 9:56 am
- Location: Italy
Re: Taito Egret 3 Original PSU Conectors Type...
I just received the Taito PSU to replace the **** Wei-ya.
Does someone knows where JST Connectors could be found?
I already order the mini molex from the link provided but i have difficult to find the two JST connectors.
Some hints?
Does someone knows where JST Connectors could be found?
I already order the mini molex from the link provided but i have difficult to find the two JST connectors.
Some hints?
- radiantsvgun
- Please Continue...
- Posts: 264
- Joined: January 13th, 2009, 9:20 pm
- Location: Georgia, USA
- eBay: Radiantsvgun
- Initials: RIC
Re: Taito Egret 3 Original PSU Conectors Type...
You will need to order them via JST webshop.
- radiantsvgun
- Please Continue...
- Posts: 264
- Joined: January 13th, 2009, 9:20 pm
- Location: Georgia, USA
- eBay: Radiantsvgun
- Initials: RIC
Re: Taito Egret 3 Original PSU Conectors Type...
Thanks to OP, I finished the adapter.