Hi. I recently purchased a Sega 29Z21. I purchased it because it has very slight burn and its getting more and more difficult to get decent 29inch monitor these days. Anyhow, this was first time I faced this 29Z21 model and attached chasis has lack of pots compare to ms9-29.
Is it possible to swap with ms9-29 chasis? Would this be full compatible?
Regards
29Z21 compatibility
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: 29Z21 compatibility
yes works perfectly, you need to make an adapter for the deflection yoke as the sanwa is 4 pin and the ms9 is 2 pin + 2 pin and the vertical header is a smaller gauge
the rgb and manual degauss connector are also different
the rgb and manual degauss connector are also different
- sugar4salt
- Please Continue...
- Posts: 19
- Joined: March 27th, 2017, 5:24 am
- Location: South Korea
- eBay: sugar4salt
Re: 29Z21 compatibility
Thank you~grantspain wrote: ↑December 26th, 2018, 9:13 am yes works perfectly, you need to make an adapter for the deflection yoke as the sanwa is 4 pin and the ms9 is 2 pin + 2 pin and the vertical header is a smaller gauge
the rgb and manual degauss connector are also different
I will try that later~