Cap kit welcomed trouble
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Cap kit welcomed trouble
Thank you for taking the time to read this. Im relatively new to owning candy cabs and just got my second one and it was working when I got it....just had some white bleeding and lightness on the sides. So decided to do a cap kit on the ms9 chassis and at first nothing...so I checked my work. Found a couple bad solder joints popped it back in and now I have a dual set of marquee 'ing blue segments up the middle...
Any idea what could be causing this? Could it just be a cap short somewhere?
Sorry again and thank you for all your help. If you would like more pictures or details, let me know!
You do not have the required permissions to view the files attached to this post.
Last edited by ncruz on November 17th, 2018, 3:10 am, edited 1 time in total.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
its odd, looks more like a game board fault than chassis- check you +5 and try a different board if you have one
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
Unfortunately, it's not a game board
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
you have full vertical deflection and from what i can see full horizontal deflection , when you capped this did you remove any chassis interconnects?
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
I didnt remove anything else from the chassis other than the caps....although I'm not sure what you mean by "interconnects"? You mean board traces or something?grantspain wrote: ↑November 17th, 2018, 10:08 am you have full vertical deflection and from what i can see full horizontal deflection , when you capped this did you remove any chassis interconnects?
Sorry
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
any cables going from neck card to chassis is what i meant
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
Negative. They're all in place properlygrantspain wrote: ↑November 17th, 2018, 4:11 pm any cables going from neck card to chassis is what i meant
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
disconnect video signal, increase screen volts on flyback so you can obtain a light full raster
reconnect video signal, post photo of result
reconnect video signal, post photo of result
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
Disconnect the video signal as in the whole neck board or just the 2 blue/red and green/yellow molex?grantspain wrote: ↑November 17th, 2018, 5:40 pm disconnect video signal, increase screen volts on flyback so you can obtain a light full raster
reconnect video signal, post photo of result
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
It just seems those segments moved further apart
You do not have the required permissions to view the files attached to this post.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
can you obtain full raster with video input disconnected?
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
It seems to obtain full raster. I also noticed when I turn off the cab it gets picture for a split second.... interestingly enoughgrantspain wrote: ↑November 18th, 2018, 10:08 am can you obtain full raster with video input disconnected?
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
did you change cap for cap or buy a cap kit?
-
- Please Continue...
- Posts: 9
- Joined: October 14th, 2018, 4:11 am
- Location: United States
- eBay: n_cruz89
- Initials: NDS
Re: Cap kit welcomed trouble
A cap kit
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Cap kit welcomed trouble
i think there is a cap wrong polarity or value or maybe a shorted track from solder work