So I have three of these coming in that are in really poor condition with super hacky wiring. Can anyone here supply me with pics of what the insides should look like? Looking for detailed pics of the PSU block, wiring looms, connectors, from under the CP, anything!
You will help save three cabs!
Many thanks!
Irem Madonna, pics of insides
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
- PunkicCyborg
- Posts: 49
- Joined: May 22nd, 2013, 5:29 pm
- Location: Tampa FL
- eBay: evan_labit
Re: Irem Madonna, pics of insides
I can send you whatever you need PM
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Irem Madonna, pics of insides
Awesome, I'll send you a PM.
- gros93
- Posts: 15
- Joined: January 12th, 2016, 1:25 pm
- Location: Paris
Re: Irem Madonna, pics of insides
I can help you if you want.
- PunkicCyborg
- Posts: 49
- Joined: May 22nd, 2013, 5:29 pm
- Location: Tampa FL
- eBay: evan_labit
Re: Irem Madonna, pics of insides
Man, sorry I dropped the ball on sending you pics, I had a arcade convention that week and brought the cab there and totally forgot but I'll get on it tonight, promise
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Irem Madonna, pics of insides
No worries and thank you for the pics
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Irem Madonna, pics of insides
So actually my cabs weren't that bad wiring wise. Already sorted that. They are a bit rusty though
Anyway, none of the three cabs came with original panels. I want to make some repros for them. For this I need a picture of a genuine panel and the dimensions of it (height and width). A scan would be awesome, however, I don't think many have the means to do this. A good quality pic from the front without buttons and the ball tops will also OK. I will vector the panel and put it on the AO Wiki.
Who's up for it?
Anyway, none of the three cabs came with original panels. I want to make some repros for them. For this I need a picture of a genuine panel and the dimensions of it (height and width). A scan would be awesome, however, I don't think many have the means to do this. A good quality pic from the front without buttons and the ball tops will also OK. I will vector the panel and put it on the AO Wiki.
Who's up for it?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 343
- Joined: December 18th, 2008, 1:09 pm
- Location: South Shields, UK.
Re: Irem Madonna, pics of insides
Whoever @davek is, i’d be shocked if he wasn’t on here.
Edit, here he is: https://forum.arcadeotaku.com/memberlis ... file&u=133
Edit, here he is: https://forum.arcadeotaku.com/memberlis ... file&u=133
Astro City is only a letter away from atrocity. Makes you think doesn’t it?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Irem Madonna, pics of insides
Yeah, I've seen that. The pic is not super great, but will do in a pinch. If I'm going to spend my time vectoring I might as well do it from the best available material. What can I say, I'm a perfectionist. I would like to know where those lines go to under the dust covers
I made the marquee in my spare time:
The control panel surround is also done.
Will upload those to the AO Wiki at some point.
I made the marquee in my spare time:
The control panel surround is also done.
Will upload those to the AO Wiki at some point.
You do not have the required permissions to view the files attached to this post.