Egret 2 issue with SH3 board
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Egret 2 issue with SH3 board
Hi guys
i got a small issue with my E2
did a full cap kit today everything went smoothly
it did correct the shacking issue and fix the goe issue too
but it didnt fix a small coloring issue i have
i made a couple of picture to show you guys to get some intel on how to fix it before i begin messing with the chassis
As you can see on the left side of the screen its a bit more darker or purple ish and i find it annoying
is it fixable by a external degauss since the E2 as auto degauss
or by turning a knob on the chassis
thx for your input
i got a small issue with my E2
did a full cap kit today everything went smoothly
it did correct the shacking issue and fix the goe issue too
but it didnt fix a small coloring issue i have
i made a couple of picture to show you guys to get some intel on how to fix it before i begin messing with the chassis
As you can see on the left side of the screen its a bit more darker or purple ish and i find it annoying
is it fixable by a external degauss since the E2 as auto degauss
or by turning a knob on the chassis
thx for your input
Last edited by Rezwalker on October 18th, 2018, 10:20 pm, edited 1 time in total.
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Egret 2 issue
I think that's the game PCB, rather than the E2 tube/chassis. I've seen the same stripe on a couple of different Mushi Futari pcbs, and it is exactly the same on different cabs.
The pic below shows something similar:
The pic below shows something similar:
You do not have the required permissions to view the files attached to this post.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: Egret 2 issue
@Rezwalker, do any other games exhibit this issue?
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue
Yeah i saw it first when i got my ddp dfk bl in the first stage
But tonight il try every pcb i have to be sure
Rez
But tonight il try every pcb i have to be sure
Rez
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue
alright after ttesting it with 5 more pcb ..
ddp doj no issue
Guwange No issue
Esp Rade no issue
DDp Sdoj Issue
ddp dfk bl Issue :eh
so pretty much only issue with SH3 board ...
is it fixable ???
i am cluless
ddp doj no issue
Guwange No issue
Esp Rade no issue
DDp Sdoj Issue
ddp dfk bl Issue :eh
so pretty much only issue with SH3 board ...
is it fixable ???
i am cluless
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue with SH3 board
and tested the sh3 in my NaC and no black line
- radiantsvgun
- Please Continue...
- Posts: 264
- Joined: January 13th, 2009, 9:20 pm
- Location: Georgia, USA
- eBay: Radiantsvgun
- Initials: RIC
Re: Egret 2 issue with SH3 board
Are you using the 29T in the egret 2? I have a few boards that don't play well with that chassis for whatever reason. I put a regular ms9-29 in and no problems. I've owned two of the 29T and both have had those problems.
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Egret 2 issue with SH3 board
Interesting
I tried on an E2 and then a NAC - same line. I also saw the line on a different board in a Windy!
I'll have a go in a couple of different cabs and see if there's a particular setup that does/doesn't show it
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
- geotrig
- Potato!
- Posts: 7534
- Joined: December 5th, 2008, 1:14 pm
- Location: ._.
- eBay: ._.
Re: Egret 2 issue with SH3 board
I'm not sure if i have a line that pronounced as above. but i didnt think it was out of the ordinary either as that cave screen is possibly the worst vaselineo vision white screen there is.
<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Egret 2 issue with SH3 board
The moving black line at the left/top is a common thing with CV1000 on MS9s. PGM2 does it as well weirdly. You can overscan it using a combination of the monitor pots and PCB settings.
I'm not sure that's what Rezwalker's talking about though is it?
I'm not sure that's what Rezwalker's talking about though is it?
- wigsplitta
- Savile's alibi
- Posts: 1178
- Joined: December 11th, 2008, 11:38 am
- Location: Fareham / Crawley
Re: Egret 2 issue with SH3 board
I think you're correct. The moving black line is visible on different games but can be easily hidden/scanned out as it's the very outer screen border.
I think rez (and me) is referring to a band of discolouration that creeps well into the picture for the length of the screen:
You do not have the required permissions to view the files attached to this post.
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
ウィッグスプリッター - スーパーガレージゲームセンター。
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue with SH3 board
in my E2 its a MS9-29T
damn now i need to look out for a 29S
damn now i need to look out for a 29S
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Egret 2 issue with SH3 board
The screen curvature is different but the chassis should work with the Toshiba tube.
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue with SH3 board
but its weird thats only on cv1000 board
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: Egret 2 issue with SH3 board
The test menu on SH3 boards also gives you the option to move the picture around without playing with your chassis.
- SuperPang
- Master or universe
- Posts: 11023
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Egret 2 issue with SH3 board
I really don't think all 29T's do this.
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Egret 2 issue with SH3 board
29t is virtually identical to su , longer neck card cables,degauss connector is other way around and thats about it- plus a protective cover under the chassis
- emphatic
- Breastfeeds when required
- Posts: 5874
- Joined: April 7th, 2009, 4:14 pm
- Location: Alingsås, Sweden
- eBay: jorgen_sjolander
- Initials: JOR
Re: Egret 2 issue with SH3 board
This can be it, guys. Make sure your source video is centered.
My games: http://www.emphatic.se
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue with SH3 board
trying that at once
- Rezwalker
- Please Continue...
- Posts: 23
- Joined: March 26th, 2012, 2:01 am
- Location:
Re: Egret 2 issue with SH3 board
Alright after checking in the test menu
i saw with the cross dot that my screen was not centered so i tweek it a bit and NO MORE BLACK LINE in mushi
then i tested it with my ddp dfk bl and same thing no more black like after i fix it under the cross dot menu
THX A LOT FOR the Help guys
thx a TON !
Rez
i saw with the cross dot that my screen was not centered so i tweek it a bit and NO MORE BLACK LINE in mushi
then i tested it with my ddp dfk bl and same thing no more black like after i fix it under the cross dot menu
THX A LOT FOR the Help guys
thx a TON !
Rez