Nanao MS2932-S compatibility
- Benimaru
- Please Continue...
- Posts: 51
- Joined: October 12th, 2018, 8:23 pm
- Location: Germany
- eBay: extension55
- Initials: PDG
Nanao MS2932-S compatibility
I was able to obtain a nearly unused MS2932-S in superb condition.
My first idea was to replace the not-so-nice tube of my Blast City only to recognize, that the bezel doesn't match...
Which cabs are compatible to the 2932-S? It came from a F355 dedicated cab originaly, the Naomi Uni should also match, didn't it?
My first idea was to replace the not-so-nice tube of my Blast City only to recognize, that the bezel doesn't match...
Which cabs are compatible to the 2932-S? It came from a F355 dedicated cab originaly, the Naomi Uni should also match, didn't it?
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
Re: Nanao MS2932-S compatibility
Naomi should match yeah, as well as some driving cabinets afaik. Also, there's a hack possible where you mount the Sega frame in front of the tube ears which recesses the monitor ever so slightly, meaning the bezel should now fit (albeit with a gap between it and the monitor).
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Nanao MS2932-S compatibility
Well, you need the correct bezel for the Naomi (NOA-1502-01).
MS-2932 will also drop in place of a MS-8 / MS-9.
MS-2932 will also drop in place of a MS-8 / MS-9.
- Benimaru
- Please Continue...
- Posts: 51
- Joined: October 12th, 2018, 8:23 pm
- Location: Germany
- eBay: extension55
- Initials: PDG
Re: Nanao MS2932-S compatibility
Thanks for the hint!
I guess it will be a pain in the **** to track such a bezel down?
I guess it will be a pain in the **** to track such a bezel down?
-
- Posts: 573
- Joined: April 17th, 2013, 5:16 pm
- Location: Netherlands
- eBay: asure_nl
Re: Nanao MS2932-S compatibility
Naomi bezel can be found, there's some around.
Blast.. not so much. Backmounting and some isolation strips black foam padding with sticky sides is probably the only way.
Blast.. not so much. Backmounting and some isolation strips black foam padding with sticky sides is probably the only way.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Nanao MS2932-S compatibility
Yeah, there's only bezel for the Blast and that fits the semi-curved (?) tubes, like the MS-2930/31/33/34 and the Sanwa 29E31S.
- Benimaru
- Please Continue...
- Posts: 51
- Joined: October 12th, 2018, 8:23 pm
- Location: Germany
- eBay: extension55
- Initials: PDG
Re: Nanao MS2932-S compatibility
Thanks for the clarification!
-
- Posts: 100
- Joined: September 29th, 2013, 5:09 pm
- Location:
Re: Nanao MS2932-S compatibility
Isn't the 2932 the same curvature as 2930/2931/2933/2934?
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
-
- Posts: 100
- Joined: September 29th, 2013, 5:09 pm
- Location:
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Nanao MS2932-S compatibility
It's curvier and the screen comes out a good bit farther from the frame (maybe half an inch?).
- Benimaru
- Please Continue...
- Posts: 51
- Joined: October 12th, 2018, 8:23 pm
- Location: Germany
- eBay: extension55
- Initials: PDG
Re: Nanao MS2932-S compatibility
I've learned recently that there are also different bushings for each type of bezel...
Are the ones for the Nanao any different from the ones for the semi curved screen other than in length?
Which length do they have exactly?
Are the ones for the Nanao any different from the ones for the semi curved screen other than in length?
Which length do they have exactly?