Be aware that they are tested on original pcbs. If you have a bootleg pcb please ask first!
Capcom Jamma Adapter (for Ghosts and Goblins ,Commando, Gunsmoke,Section Z, Legendary Wings, Avengers, Trojan ) :
Price 20€
1 pieces on stock
IREM Jamma Adapter with possibility to swap push buttons ( Moon Patrol, Kung Fu Master / Spartan X, Spelunker 1 and , Lode Runner, 10 Yard Fight, Kid Niki Radical Ninja, Traverse USA,Tropical Angel, Wily Tower / Atomic Boy)
Price 20€
6 pieces on stock
Namco Jamma Adapter (Xevious,Mappy,Bosconian,Super Pacman,Phozon,Motos,Galaga,Gaplus
Pacland,Dig Dug 1 e 2,Sky Kid,Metro Cross,Toypop,Baraduke,Dragon Buster)
Featuring alternative pacland controls (buttons for directions) and Libble Rabble controls ( double way joystick)
Price 25€
4 pieces on stock
Sega System 1 Jamma Adapter with possibility to swap push buttons.
List of games:
http://www.system16.com/hardware.php?id=693
http://www.system16.com/hardware.php?id=694
Price 20€
6 pieces on stock
Sega System 16/24 Jamma Adapter with configurable push buttons.
List of games:
http://www.system16.com/hardware.php?id=695
http://www.system16.com/hardware.php?id=700
http://www.system16.com/hardware.php?id=701
http://www.system16.com/hardware.php?id=708
Basic Price 25€
3 pieces on stock
With 5€ overprice I can solder the connector and cables for wiring Passing Shot 1P controls which are on a separate board on the pcb
It supports both single joystick play and the original control panel like controls with double joystick
Will send also the instructions where to connect the cables on the original pcb separate board.
Tehkan Jamma Adapter
Bombjack ,Senyjo,Guzzler,Rygar,Star Force,Tank Busters,Meg Force
including Jumper to configurate Bomback or other games inputs
Price 25€
5 pieces on stock
1942 / Vulgus Jamma Adapter
Price: 20€
2 pieces on stock
Exerion Jamma Adapter
compatible also with Formation Z / Aerobot and City Connection
Price: 20€
1 items on stock
Falcon Type A Jamma Adapter
compatible with:
Falcon Crazy Kong ( it has two connectors , type A is for the side one)
Phoenix
Eyes from Rockola/Zaccaria
Some Sigma games such as Battle Cruiser M-12
IMPORTANT: It is not compatible with Crazy Kong by ORCA.
Price 20€
6 items on stock
Falcon Type B Jamma Adapter
compatible with:
Crush Roller
Kyugo/Crux games such as:
Gyrodine/Buzzard
Sky Lancer
Flashgal
99 Last War / Repulse
Legend
Price: 20€
5 Items on stock
Higemaru Jamma Adapter
Price 20€
2 pieces on stock
Son Son Jamma Adapter
Price: 20€
3 pieces on stock
Konami Jamma Adapter
compatible with all pre jamma Konami games with support up to 3 buttons (Iron Horse).
Possibility to swap 1st/2nd button and to choose alternate button controls for Hyper Olympic/Hyper Sports as found in the original cabinet.
Supports additional right speaker for Gyruss pcb stereo music
Price: 25€
4 pieces on stock
Nichibutsu Jamma Adapter
compatible with Mag Max,Terra Cresta, Dangar Ufo Robot, Cosmo Police Galivan, Mighy Guy
Price: 20€
4 items on stock
SNK Jamma Adapter
Compatible with SNK classic games such as:
Ikari Warriors
Alpha Mission/Arian Mission
TNK3/TANK
Price: 20€
7 items on stock
TECFRI Jamma Adapter
compatible with TECFRI spanish games such as:
Hole Land
Crazy Rally
Sauro
Tricky Doc
Price: 20€
2 Items on stock
Toaplan Jamma Adapter
compatible with Slap Fight,Tiger Heli, Get Star / Guardian and Performan
Price: 20€
4 items on stock
Zaxxon Jamma Adapter
compatible with Zaxxon, Super Zaxxon, Congo Bongo and Future Spy
Price 20€
4 items on stock
Universal Mr.Do! Jamma Adapter with built in amplifier
Compatible with Lady Bug, Mr.Do,Mr.Do Castle, Mr.Do Vs Unicorns, Do Run Run, Mr.Do Wild Ride, Cosmic Avenger
May work with other games or bootlegs but haven't tested.
The adapter comes with amplifier with adjustable Volume / Gain / Bass trimmers for games which don't have a sound amp on board
For Lady Bug which comes already with an amplifier on the pcb, you can switch off the adapter one.
It has also a footprint to solder an external connector in case you want to use an external amplfier of your choice.
Price 35€
5 pieces on stock
DATA EAST Jamma Adapter with possibility to play Karate Champ and Karate Champ Vs
Compatible with:
Karate Champ and Karate Champ VS ( the jumpers selects Jamma 2P player joystick for attacks. Only 1 player is supported for obvious reasons)
Battle Wings
Big Pro Wrestling!
B-Wings
Competition Golf
Ring King
Shootout
Battle Lane Vol. 5
Express Raider
Price 25€
5 piece on stock
Escape From The Planets of The Robots Monster Jamma Adapter with circuit to use digital joysticks instead of the original rare and expensive HALL Effect ones
Price 40€
3 items on stock
TAITO classics Jamma Adapter
Compatible with:
Bubble Bobble, Tokio / Scramble Formation, Arkanoid,Elevator Action, Jungle King,Pit Run,Alpine Ski,Front Line,Tin Star,Wild Western,Kick Start
With a set of jumpers you can select single joystick games or double joystick games such as Tin Star, Front Line and Wild Western
Basic price is 35€ and you will get male connector soldered for Arkanoid spinner and the 12 pins power connector needed for all the games ( see picture)
Optionally for 45€ you will get extra harness for Halley Comet pcb
2 items on stock
SNK classics early 80s adapter
Compatible with:
Fantasy,Satan Of Saturn,Sasuke vs. Commander, Nibbler, Vanguard, Pioneer Baloon
With set of Jumpers you can select alternate controls for Vanguard with second joystick to shoot in the 4 directions.
Price 25€
2 items on stock
Taito Samurai / The Alpha Z / Mission 660 / Lady Master of Kung Fu
Price 20€
3 items on stock
Technos Jamma Adapter
Compatible with early Technos games such as Eggs, Scramble Eggs, Mysterious Stones, Acrobatic DogFight
Exciting Hour,Mat Mania , probably others
Price 20€
4 items on stock
Frisky Tom / Seicross / Radical Radial Jamma Adapter
Price 25€
1 items on stock
Spinner Jamma interface multipurpose
Compatible with Taito F3 spinner games ( Puchi Carat, Arkanoid Returns), Suna games ( Goindol, Brick Zone), Sega Nihon games ( Free kick)
Caliber 50 ( using Loop24 joystick), Badlands ( you can play it with a spinner yes!)
Spinner inputs are going to either pin 25/26 or 20/21 so many other games could work using the combination of pulldown resistors ( 2.2K or 10k)
It is tested with a TAITO spinner which doesn't have any pulldown resistors but it can work with any other spinners providing you disable
the pulldown resistors using the jumpers
It supports also Combat School joystick version ( directions are on a separate connector) and Cabal third button ( on the original board
is is wired on the test button)
Price 35€
4 items on stock
Nintendo Jamma adapter
Compatible with Donkey Kong ( 2 board ), Donkey Kong Jr. , Mario Bros, Popeye and Donkey Kong 3
The adapter comes with quality colour inversion circuit which is a reproduction of the Hantarex one found on Nintendo cabinets imported in Europe.
The adapter has also an amplifier with adjustable volume, gain and bass.
Both the inversion circuit and the amplifier can be disabled via jumpers for later nintendo boards which have aldready the circuits installed on the boards.
Price 45€
3 items on stock
Taito Gladiator: Compatible with Gladiator and Ping Pong King
Price 20€
3 pieces on stock
DATA EAST Cassette: compatible with all DECO Cassette hardware and also with the following pcbs: Burning Rubber / Burger Time / Disco No.1 / Zoar / Liberation
Price all assembled including 10 pins edge connector for bottom board: 30€
3 items on stock
Alpha Denshi Classics: compatible with Equites, Splendor Blast, High Voltage, Kyros, Super Stingray, Bull Fighter
Price all assembled including additional 6 pins edge connector for sound: 30€
2 items on stock
Kangaroo jamma adapter for rev.B PCB ( the one more common with the edge connectors)
Price all assembled including 10 pins edge connector for bottom board: 30€
4 items on stock
Qbert bootleg jamma adapter with circuit to use a normal 8 way joystick ( originally you have to rotate a 4 way joystick by 45°, not very confortable on a jamma cabinet
Price 25€
3 items on stock
Pandora Jamma adapter with 6th button P1 and P2 soldering point ( Pandora use pin 27 for 6th button, with this adapter you avoid to solder directly on the pcb connector
Price 15€
1 pieces on stock
Sega System E jamma adapter with support also for Riddle of Pythagoras spinner. The adapter is inserted durectly on the two AMP connectors of the System E
Price 25€
4 items on stock
Taito Great Swordsman Jamma adapter
Price 25€
4 pieces on stock
Namco Pacman / Galaxian / Mooncresta / Tank Battalion Jamma adapter
It could work also with bootleg but no guarantee is given
Price 25€
6 items stock
Atari Centipede Jamma Adapter
including sound amplifier on board with adjustable Volume / Gain / bass trimmers.
Supports both Trackball AND Joystick gameplay
Price 35€
3 items on stock
Atari Crystal Castles Jamma Adapter
including sound amplifier on board with adjustable Volume / Gain / bass trimmers.
Price 35€
5 items on stock
Playchoice 10 Double monitor Jamma adapter
comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers and with the possibility to switch the 2 screens on the fly with button 3 ( instruction / credit screen and game screen )
Separate gun connector with clear pinout.
Price 50€
2 items on stock
Nintendo VS Jamma adapter
comes with quality colour inversion circuit, sound amplifier with adjustable Volume / Gain / Bass trimmers.
Possibility to switch switch between Main side and Slave side of the pcb providing you populate the board with two games.
If something is unclear, please drop me a message!
Price 55€
2 items on stock
Shipping rate up to two adapters is 13 euros with registered letter for all Europe
I accept Paypal gift or goods but in the latter case please add 4% on top.
