I’m trying to connect a 360 to my Blast City via vga cable. The 360 is set to 480p and I set the dip switches on the Blast City to 31 kHz vga. The picture I get is divided in the middle (see image). What could be the cause and how do I fix it?
https://i.imgur.com/eRDr7YV.jpg
Problem with picture when connecting Xbox 360 to Blast City cab
-
- Please Continue...
- Posts: 8
- Joined: August 6th, 2011, 4:37 pm
- Location: Sweden
- eBay: plastkasse
-
- Please Continue...
- Posts: 8
- Joined: August 6th, 2011, 4:37 pm
- Location: Sweden
- eBay: plastkasse
Re: Problem with picture when connecting Xbox 360 to Blast City cab
After some googling, I Think the monitor might still be in 15 kHz mode. I have to check my dip switches when I get home.
-
- Please Continue...
- Posts: 8
- Joined: August 6th, 2011, 4:37 pm
- Location: Sweden
- eBay: plastkasse
Re: Problem with picture when connecting Xbox 360 to Blast City cab
Triple checked the dip switches. They should be right (off, on, on), but I still get the double image.
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: Problem with picture when connecting Xbox 360 to Blast City cab
Is the Xbox definitely outputting @640 x 480?
As that image looks like the input resolution is too high for the monitor
As that image looks like the input resolution is too high for the monitor
-
- Please Continue...
- Posts: 8
- Joined: August 6th, 2011, 4:37 pm
- Location: Sweden
- eBay: plastkasse
Re: Problem with picture when connecting Xbox 360 to Blast City cab
Solved it! Despite what the manual I found said, off, off, on worked.