MS8 18A. It misses a wire..
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
MS8 18A. It misses a wire..
Just discovered that a brown wire is missing on the 6pin connector who goes to the jamma to give image, but I didn't notified any bad result on it. It looks like somebody cutted it. Should I replace?
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 18A. It misses a wire..
its vertical sync, very few game boards need it
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: MS8 18A. It misses a wire..
Thanks
Can you tell me into which pin of the jamma harness should this wire goes?
Can you tell me into which pin of the jamma harness should this wire goes?
Arcade's nice when done well
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: MS8 18A. It misses a wire..
There's no pin on the jamma harness for vertical sync.
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: MS8 18A. It misses a wire..
This shouldn't work? So where to connect this wire?nem wrote:There's no pin on the jamma harness for vertical sync.
Arcade's nice when done well
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: MS8 18A. It misses a wire..
Nothing is missing. There's just one sync wire from the jamma connector and that's composite sync (H+V). It's normal to send that to the H sync pin on the monitor input header and leave the V sync pin unconnected. Lots if not all monitors are like that and btw do you have sync problems? No, so what are you trying to fix?
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: MS8 18A. It misses a wire..
Manfacture don't cut any wire. To me it's a missing wire cutted by the last owner, so I just want to make as was at basis.
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: MS8 18A. It misses a wire..
most looms do not have this wire, if it did then it would terminate in an interconnector and go nowhere- I think you are being a bit ocd
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: MS8 18A. It misses a wire..
How wonderfull is it to be an ocd ahahahah. It's your opinion, not mine. But everybody has his weird sides.
Arcade's nice when done well
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: MS8 18A. It misses a wire..
If it's not broken, fix it until it is broken.
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
- copados33
- Please Continue...
- Posts: 538
- Joined: March 20th, 2013, 1:30 pm
- Location: Uruguay South America
- eBay: psycho-q
Re: MS8 18A. It misses a wire..
I don't know how to fix this, but I'm amazed with erzane's drawing skills.
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: MS8 18A. It misses a wire..
Thankscopados33 wrote:I don't know how to fix this, but I'm amazed with erzane's drawing skills.
Familiarcools wrote:If it's not broken, fix it until it is broken.
I would like to fix this issue since (if I wait some days - after a break - before starting the cab) the image take time to be stable.
If I wire this V sync like this, can I have a problem or is it safe to try?
Arcade's nice when done well