Got no problem with my naomi 1 setup (either was with gd-rom drive or netbooting) for the past years
but all of sudden when i power it up i get black screen for apparently no reason because everything is just the same it was when it worked
if i unplug the net Dimm the naomi shows the error for no cart/game/whatever inserted
also i tried the net Dimm on net city with a naomi 2 and it correctly boots waiting for network
so i came to the conclusion that my naomi 1 mobo is the problem
could it be a contact problem or is anything else?
i already dismounted the upper case in order to give the mobo and net dimm a tighter squeeze but that still didn't do the job :/
Naomi 1 + NetDimm black screen
- @Alaska-
- Please Continue...
- Posts: 125
- Joined: February 1st, 2009, 2:22 pm
- Location: Italy
- codecrank
- Please Continue...
- Posts: 466
- Joined: January 9th, 2011, 7:32 pm
- Location: NSA Central
Re: Naomi 1 + NetDimm black screen
you'll get a black screen if the voltages aren't right, the netdimm setup does pull a bit more juice. PSUs degrade over time, did you try bumping the voltage up a bit ?
- Santashiva
- Posts: 50
- Joined: June 22nd, 2014, 11:31 am
- Location: Lille , France
Re: Naomi 1 + NetDimm black screen
Did you try to test the voltage with
- only the motherboard
- motherboard with the net dimm
I think that bumping your voltage up a bit can be the solution
- only the motherboard
- motherboard with the net dimm
I think that bumping your voltage up a bit can be the solution
SNK : The legend will never died
- @Alaska-
- Please Continue...
- Posts: 125
- Joined: February 1st, 2009, 2:22 pm
- Location: Italy
Re: Naomi 1 + NetDimm black screen
i didn't have any testing for the voltage but i forgot to mention that i 'm using an external psu for the naomi setup (so no juice is pulled from the astro city psu)
psu is a regular pc atx
if i would where i should measure the voltage?
psu is a regular pc atx
if i would where i should measure the voltage?
- Santashiva
- Posts: 50
- Joined: June 22nd, 2014, 11:31 am
- Location: Lille , France
Re: Naomi 1 + NetDimm black screen
Yes I think@Alaska- wrote:if i would where i should measure the voltage?
SNK : The legend will never died
- codecrank
- Please Continue...
- Posts: 466
- Joined: January 9th, 2011, 7:32 pm
- Location: NSA Central
Re: Naomi 1 + NetDimm black screen
JVS power lugs@Alaska- wrote:if i would where i should measure the voltage?
- @Alaska-
- Please Continue...
- Posts: 125
- Joined: February 1st, 2009, 2:22 pm
- Location: Italy
Re: Naomi 1 + NetDimm black screen
are they both needed to power up the naomi?
i use just the 4x2 connector
there also is a 3x2 connector on the Capcom I/O
is that utilized somewhat?
i use just the 4x2 connector
there also is a 3x2 connector on the Capcom I/O
is that utilized somewhat?