Sega Blast City Speakers replace

Post by **gamescollector** » November 19th, 2014, 10:35 am

Hi guys

I ask your help to replace the speakers of my blast city, I would like to replace only the speakers, but I can not find the right size (102mm x 45mm 4 or 8 Ohm).

Can you help me?

baddy · Post by **baddy** » November 19th, 2014, 2:06 pm

Good luck bud, I couldn't find anything. videotronicsuk might have some.

Post by **Rossyra** » November 19th, 2014, 2:33 pm

http://www.ebay.co.uk/itm/Sega-Arcade-M ... 1c490293da"

codecrank · Post by **codecrank** » November 19th, 2014, 3:08 pm

oh wow, perfect timing

Post by **gamescollector** » November 19th, 2014, 5:17 pm

Thanks for flagging but they are still broken.
I seek only the speakers with size 12 "W x 9.5" L x 2 "H inches

codecrank · Post by **codecrank** » November 19th, 2014, 9:38 pm

gamescollector wrote:Thanks for flagging but they are still broken.
I seek only the speakers with size 12 "W x 9.5" L x 2 "H inches

we contacted toptone a while back , the speakers were 10 $USD each, but and they wanted a ridiculous price for shipping. if you find a cheap replacement please share. I'll put it on this page which I just created

http://wiki.arcadeotaku.com/w/Sega_Blast_City_Speakers"

Post by **gamescollector** » November 20th, 2014, 11:22 pm

This seller?

http://www.toptone.co.jp/en/products/index.html"

I have contacted them, I wait.....

Post by **gamescollector** » November 21st, 2014, 8:26 pm

unfortunately are no longer available, I have to fit a model of the same size.

original Speaker

http://www.toptone.co.jp/en/products/fu ... U01-1.html"

I use this.

http://www.monacor.de/it/prodotti/tecni ... i/sp-594s/"

Post by **xga** » November 22nd, 2014, 3:38 pm

How did you make them fit? The original speakers are 45mm wide and the Monacor SP-59/4S speakers are 50mm wide. Do you have any photos of them fitted?

gamescollector wrote:unfortunately are no longer available, I have to fit a model of the same size.

original Speaker

http://www.toptone.co.jp/en/products/fu ... U01-1.html"

I use this.

http://www.monacor.de/it/prodotti/tecni ... i/sp-594s/"

Post by **gamescollector** » November 25th, 2014, 10:32 am

Unfortunately I already reinstalled everything.
I cut just one side of the plastic and they entered, while being tight.
I closed everything with duct tape.
The sound now is very nice and without distortion.

codecrank · Post by **codecrank** » November 25th, 2014, 4:16 pm

gamescollector wrote: I cut just one side of the plastic and they entered, while being tight.
I closed everything with duct tape.

Post by **Rossyra** » November 25th, 2014, 8:10 pm

Post by **gamescollector** » November 26th, 2014, 3:21 pm

was referring to the part of the plastic case not to speakers.

Post by **xga** » November 26th, 2014, 11:16 pm

Those Monacor replacement speakers look pretty good. In terms of actual sound quality, how do they compare to the original Toptone speakers?

baddy · Post by **baddy** » November 27th, 2014, 1:23 pm

Anything is better than those toptone speakers.

Sega Blast City Speakers replace

Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace

Re: Sega Blast City Speakers replace