Built this, hope it helps:
Small:
Big:
http://picload.org/image/apialgo/ponymarkiii-marq.jpg"
Don't know the exact measures, but its very highres, figure out the rest for yourself.
Pony Mark III-Marquee
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Pony Mark III-Marquee
Last edited by Wurstkopp on June 3rd, 2013, 11:35 am, edited 4 times in total.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Re: Pony Mark III-Marquee
Could anybody please measure the width of the writing?
- meyerli
- Posts: 138
- Joined: February 28th, 2012, 4:06 am
- Location: Lakeside, Switzerland
- eBay: meyerli0
- Initials: MAN
Re: Pony Mark III-Marquee
The requested width is 48,4cm.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
-
- Please Continue...
- Posts: 5
- Joined: September 12th, 2015, 9:49 pm
- Location: Monterrey, Mexico
- eBay: videogamesmx
- Initials: ABE
Re: Pony Mark III-Marquee
Hello, sorry for the necro bump, the original picture is long gone, anybody has a backup? Found a few Pony Mark III that had the original marquee replaced and I'd like to restore them if possible.
- aerobert
- Posts: 357
- Joined: June 15th, 2018, 12:37 pm
- Location: Sweden
- eBay: romajoh
Re: Pony Mark III-Marquee
Bump, I also need a hires version of this.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
-
- Please Continue...
- Posts: 98
- Joined: November 11th, 2013, 9:17 pm
- Location: Wigan, England
- eBay: recycle-squad
Re: Pony Mark III-Marquee
Awesome, I actually need two of these myself so thanks very much for the work