Forgotten Worlds Connector
- jepjepjep
- Posts: 149
- Joined: July 16th, 2009, 10:13 pm
- Location: California
Forgotten Worlds Connector
I'm looking for the connector that's used for the spinner harness that attaches to the PCB on Forgotten Worlds. I have a FW board and an arkanoid spinner I want to try to connect to it. I know that it is different from a CPS1 or CPS2 kick harness connector, but I don't actually know what kind of connector is used. Any ideas?
-
- Please Continue...
- Posts: 138
- Joined: August 17th, 2008, 8:31 pm
- Location: Zofingen, Switzerland
- eBay: boergi_x
- jepjepjep
- Posts: 149
- Joined: July 16th, 2009, 10:13 pm
- Location: California
Re: Forgotten Worlds Connector
I took a look at the manual and it's the 16-pin connector that I need (page 22). I didn't see any part numbers or description about what type of connector it is though (other than CN-MOWS).
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Forgotten Worlds Connector
Have you got a photo of either the header or the connector?
- jepjepjep
- Posts: 149
- Joined: July 16th, 2009, 10:13 pm
- Location: California
Re: Forgotten Worlds Connector
Here's a photo of the board with the male side of the connector (CN-MOWS):
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Forgotten Worlds Connector
It looks to be a 16 pin JST NH header - part number B16P-SHF-1AA
The mating connector would be H16P-SHF-AA and the crimp pins for it are SHF-001T-0.8BS
The mating connector would be H16P-SHF-AA and the crimp pins for it are SHF-001T-0.8BS
- jepjepjep
- Posts: 149
- Joined: July 16th, 2009, 10:13 pm
- Location: California
Re: Forgotten Worlds Connector
Thanks for the info!