Hello,
I want to change my Taiwan Region Battle Garegga PCB into a Japanese one. Do i just need to burn and insert the two program roms found on this page? That's all?
http://www.world-of-arcades.net/R8zing/ ... isions.htm"
Thanks, Henk.
Battle Garegga PCB Revision Change
- goatboy
- Posts: 849
- Joined: October 5th, 2008, 3:39 pm
- Location: The Netherlands
- eBay: henknieborg
- jepjepjep
- Posts: 149
- Joined: July 16th, 2009, 10:13 pm
- Location: California
Re: Battle Garegga PCB Revision Change
Yes, it's a two eeprom swap. I would suggest using the zakk version.
http://bigcore.rsdio.com/zakk/replay/?p=98"
http://bigcore.rsdio.com/zakk/replay/?p=98"
- goatboy
- Posts: 849
- Joined: October 5th, 2008, 3:39 pm
- Location: The Netherlands
- eBay: henknieborg
Re: Battle Garegga PCB Revision Change
Thanks but those roms do not check anymore. Also heard you have to clip jumper 3 and 4. So going back to the original Taiwan version is impossible after that?
About the zakk hack. These are ips patches. How do you patch the original JP roms?
About the zakk hack. These are ips patches. How do you patch the original JP roms?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Battle Garegga PCB Revision Change
http://www.zophar.net/utilities/patchutil.html"The classic IPS.EXE. Used to apply hacks/patches to ROMs. Usage is "IPS x.rom y.ips" where x is the name of the target rom, and y is the patch file in the same directory. Now includes the Turbo Pascal source code!
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Battle Garegga PCB Revision Change
Download the MAME ROMs and an IPS patcher. Good to go.
The Jumpers can be easily soldered back if required.
Edit, didn't see the reply above.
The Jumpers can be easily soldered back if required.
Edit, didn't see the reply above.
- goatboy
- Posts: 849
- Joined: October 5th, 2008, 3:39 pm
- Location: The Netherlands
- eBay: henknieborg
Re: Battle Garegga PCB Revision Change
Thanks a lot ppl!