You've Got Grail! The Valuation Thread

Post by **neil2k1** » January 26th, 2011, 5:20 pm

Price please for Raiden Fighters Jet and Mobo in excellent order

Post by **thomj** » January 26th, 2011, 5:24 pm

about £110

Post by **neil2k1** » January 26th, 2011, 5:26 pm

Thanks man

Akuma · Post by **Akuma** » January 26th, 2011, 6:02 pm

alienmame wrote:What's missing?

Or even better, what's included?

Definition of "shell" can vary considerably

Easier to tell what has to be added

- monitor
- control panel
- power supply
- speaker chassis (the speaker boxes are there)
- coin mech
- back hatch is a repro
- marquee holder
- Jamma loom is present but might need work to connect to psu, monitor, speakers, coin mech / coin counter, depending on which components are chosen

Post by **AeroCityMayor** » January 26th, 2011, 7:26 pm

Akuma wrote: Easier to tell what has to be added

- monitor
- control panel
- power supply
- speaker chassis (the speaker boxes are there)
- coin mech
- back hatch is a repro
- marquee holder
- Jamma loom is present but might need work to connect to psu, monitor, speakers, coin mech / coin counter, depending on which components are chosen

IMVHO that lot is worth around £80gbp.

If I was considering the purchase, the one part that would concern me is:

Akuma wrote: - speaker chassis (the speaker boxes are there)

Do yo mean that the speaker surround which is usually SEGA yellow is missing?

If so, that part is like rocking horse **** and you might as well part the rest out for what you can get.

I'd also ask if the loom was the original SEGA loom.

Just my £0.02

HTH

Cheers,

Ralph.

Akuma · Post by **Akuma** » January 26th, 2011, 7:48 pm

alienmame wrote:
Akuma wrote: Easier to tell what has to be added

- monitor
- control panel
- power supply
- speaker chassis (the speaker boxes are there)
- coin mech
- back hatch is a repro
- marquee holder
- Jamma loom is present but might need work to connect to psu, monitor, speakers, coin mech / coin counter, depending on which components are chosen
IMVHO that lot is worth around £80gbp.

If I was considering the purchase, the one part that would concern me is:

no no,

Akuma wrote: - speaker chassis (the speaker boxes are there)
Do yo mean that the speaker surround which is usually SEGA yellow is missing?

If so, that part is like rocking horse **** and you might as well part the rest out for what you can get.

I'd also ask if the loom was the original SEGA loom.

Just my £0.02

HTH

Cheers,

Ralph.

No no no, the yellowing speaker surround is there and also the black boxes - only the speaker chassis... drivers.. or what they are called aren't there. Original Sega loom, yes. 80 GBP?

I paid 200 or so due to the supply and demand situation (no other was available)

Post by **AeroCityMayor** » January 26th, 2011, 7:52 pm

Akuma wrote:I paid 200 or so due to the supply and demand situation (no other was available)

Holy f00k d00d!

Though if you have the patience to part it out, you may get your money back!

Cheers,

Ralph.

Akuma · Post by **Akuma** » January 26th, 2011, 7:56 pm

alienmame wrote:
Akuma wrote:I paid 200 or so due to the supply and demand situation (no other was available)
Holy f00k d00d!

Though if you have the patience to part it out, you may get your money back!

Cheers,

Ralph.

Well, general idea was - worth 500 to 600 with monitor, monitor = 200 to 300 so shell at 200 seemed fair

ratson · Post by **ratson** » January 26th, 2011, 9:19 pm

The joystick, not me. I'm worthless

Post by **davewellington** » January 26th, 2011, 9:37 pm

Looking for prices on "1 sega outrunners twin pcb with manual" and " point black pcb with full loom". Following up with the seller weather point blank has guns. Cheers!

Post by **AeroCityMayor** » January 26th, 2011, 9:48 pm

Akuma wrote: Well, general idea was - worth 500 to 600 with monitor, monitor = 200 to 300 so shell at 200 seemed fair

The guesstimate I posted was based heavily on the UK market where Astro cabs are very common but we're all in the position where the cabs are worth more parted out than as a whole.

For the original Astro loom and the intact speaker surround, I'll go to £120.

Good luck d00d,

Ralph.

Post by **davewellington** » January 26th, 2011, 11:01 pm

davewellington wrote:Looking for prices on "1 sega outrunners twin pcb with manual" and " point black pcb with full loom". Following up with the seller weather point blank has guns. Cheers!

Has guns in dodgy condition (recoil broken, maybe missing some screws). Cheers

skykid · Post by **skykid** » January 27th, 2011, 7:03 pm

Hey guys,

I'm selling a Chimp PCB board for dual TE stick modding for £27. It's brand new sealed with manual etc, but according to a guy who PM'd me, it's only worth £15 shipped in the EU - is this a realistic price for it? I don't know because it was a part of the prize I won.
If it's really only worth that much I might keep it, but I was just wondering if someone knew any different?

Thanks

Post by **Rossyra** » January 27th, 2011, 7:12 pm

£15 shipped for a Ch1mp is a joke, I just sold a TE pcb for that.

They are £39.50 on Gremlin + VAT + Delivery, that's at least £50 delivered in the UK.

If someone can find a source for £15 each I'll take 4!

Akuma · Post by **Akuma** » January 27th, 2011, 8:43 pm

Given I would find one.............. how much would a working Nanao MS-2931 or MS-2930 chassis plus remote board cost me??

skykid · Post by **skykid** » January 27th, 2011, 8:46 pm

Rossyra wrote:£15 shipped for a Ch1mp is a joke, I just sold a TE pcb for that.

They are £39.50 on Gremlin + VAT + Delivery, that's at least £50 delivered in the UK.

If someone can find a source for £15 each I'll take 4!

Yeah, Gremlin is what I looked at too, but according to the chappie Lizardlick has them for $36 and Gremlin's prices are insane.

(Lizardlick do have em for $36, on checking.)

I really need some advice on this man, I'm getting fed up not understanding about these damn things.

If anyone has any tech experience with these, please give me a hand here:

http://forum.arcadeotaku.com/viewtopic.php?f=26&t=14508"

Post by **thomj** » January 27th, 2011, 9:07 pm

gekrindan full kit?

Post by **Rossyra** » January 27th, 2011, 9:10 pm

skykid wrote:
Rossyra wrote:£15 shipped for a Ch1mp is a joke, I just sold a TE pcb for that.

They are £39.50 on Gremlin + VAT + Delivery, that's at least £50 delivered in the UK.

If someone can find a source for £15 each I'll take 4!
Yeah, Gremlin is what I looked at too, but according to the chappie Lizardlick has them for $36 and Gremlin's prices are insane.
(Lizardlick do have em for $36, on checking.)

I really need some advice on this man, I'm getting fed up not understanding about these damn things. If anyone has any tech experience with these, please give me a hand here:

http://forum.arcadeotaku.com/viewtopic.php?f=26&t=14508"

Even so thats £22.50 before international shipping and possibly customs fees. How does that equate to £15 shipped?

IDCHAPPY · Post by **IDCHAPPY** » January 27th, 2011, 10:13 pm

Customs fee's would be nearly £20 if you were unlucky

Munchies · Post by **Munchies** » January 28th, 2011, 4:01 pm

Hi guys I'm just wondering, what would one of those 001 looms cost and where can I get them?
Cheers
Mark

You've Got Grail! The Valuation Thread

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?

Re: What's it worth?