Anyone ever drilled open a Naomi cashbox lock?

Arcade cabinet hardware and accessories
Post Reply
User avatar
Akuma
Can't stay away from students
Posts: 2334
Joined: August 24th, 2008, 11:29 am
Location: near Düsseldorf, Germany
eBay: Akuma.from.the.Arcade

Anyone ever drilled open a Naomi cashbox lock?

Post by Akuma »

Got no key to mine and have to open it. How to approach drilling it open? Any other options??
User avatar
chubsta
I'm getting too old for this shit...
Posts: 808
Joined: August 17th, 2008, 5:13 pm
Location: Folkestone, Kent, UK
eBay: chubsta

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by chubsta »

start with a small metal drill, and gradually go larger - i also found it helps if the drill is spinning befor you touch the metal otherwise it can jam in the key slot - and for gods sake wear protective glasses!
User avatar
FrancoB
J+ member of the year finalist!
Posts: 4758
Joined: June 8th, 2009, 10:42 pm
Location: Oxfordshire
eBay: francosquashking
Initials: FRN

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by FrancoB »

I did one of mine the other week. I started with a 3mm drill and was going to go up in 1-2mm stages but the 3mm caught in the lock and spun it open :)
User avatar
grantspain
Tech Head
Posts: 4824
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by grantspain »

4mm drill straight through the 12 o'clock key locator insert-drill until you hear a crack and thats the barrel pin broken,then use an old key similar to the lock and wrench round-should do the trick
User avatar
Akuma
Can't stay away from students
Posts: 2334
Joined: August 24th, 2008, 11:29 am
Location: near Düsseldorf, Germany
eBay: Akuma.from.the.Arcade

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by Akuma »

Oh! Thanks for all the quick answers that actually made me look at this rather optimistic - thought I'd be looking at a big problem but obviously it is not that hard - kewl! :awe:
Parris
The ¥100 Ashtray
Posts: 1008
Joined: August 18th, 2008, 8:28 pm
Location:

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by Parris »

Just use a decent set of drill bits, not those cheap Bosch **** as they dull down in seconds and you'll end up with white finger & staring at the blunt drill bit licking the inside of the lock for 30 mins or so. A good metal drill just goes right through in under a minute. Done it a few times.
User avatar
Akuma
Can't stay away from students
Posts: 2334
Joined: August 24th, 2008, 11:29 am
Location: near Düsseldorf, Germany
eBay: Akuma.from.the.Arcade

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by Akuma »

grantspain wrote:4mm drill straight through the 12 o'clock key locator insert-drill until you hear a crack and thats the barrel pin broken,then use an old key similar to the lock and wrench round-should do the trick
Okay, have to revive this.

I did as Grant said, and also heard the crack but an old key didn't help. Drilled a bit more and also drilled on the 6 o'clock.

This is what it looks like at the moment:
lock.jpg
What exactly do I have to remove? If I drill away the inner part, will this open the lock?
You do not have the required permissions to view the files attached to this post.
User avatar
FrancoB
J+ member of the year finalist!
Posts: 4758
Joined: June 8th, 2009, 10:42 pm
Location: Oxfordshire
eBay: francosquashking
Initials: FRN

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by FrancoB »

MOAR POWAR!

Image
User avatar
grantspain
Tech Head
Posts: 4824
Joined: August 17th, 2008, 4:23 pm
Location: down south

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by grantspain »

keep drilling at 12 o'clock,use a bolt and hammer the centre-then twist the centre part
User avatar
Akuma
Can't stay away from students
Posts: 2334
Joined: August 24th, 2008, 11:29 am
Location: near Düsseldorf, Germany
eBay: Akuma.from.the.Arcade

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by Akuma »

Okay, thanks!! :awe:
User avatar
SmokeyFingaz
Please Continue...
Posts: 61
Joined: August 18th, 2008, 4:23 am
Location: Cologne, Germany

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by SmokeyFingaz »

still need to do this to my ic09 egret - but im too frightened!
Parris
The ¥100 Ashtray
Posts: 1008
Joined: August 18th, 2008, 8:28 pm
Location:

Re: Anyone ever drilled open a Naomi cashbox lock?

Post by Parris »

Seriously, with the right tools / drill bit and a bit of confidence it's done in a few minutes
Post Reply