Naomi 29e31s bezel part number?
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Naomi 29e31s bezel part number?
I need a bezel for one of my Naomis and its 29e31s monitor.
I have two bezels here but neither of them fit. One is the PFX bezel (no suprise there!) and the other one doesn't fit either. How many types of Naomi bezels are there?
Anywho's, does any one know the part number for the 29e31s bezel? Penrhos may have one for me but he wants to know the part number.
I have two bezels here but neither of them fit. One is the PFX bezel (no suprise there!) and the other one doesn't fit either. How many types of Naomi bezels are there?
Anywho's, does any one know the part number for the 29e31s bezel? Penrhos may have one for me but he wants to know the part number.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Naomi 29e31s bezel part number?
Three.FrancoB wrote:How many types of Naomi bezels are there?
It's whatever part number you don't have
- andygeezer
- Blue Skies Ahead
- Posts: 2427
- Joined: August 24th, 2008, 12:25 pm
- Location: Cambridge, UK
- Initials: AGS
Re: Naomi 29e31s bezel part number?
noa-1502-01, noa-1502-02 and noa-1502-03
01=nanao
02=sanwa
03=pure flat
01=nanao
02=sanwa
03=pure flat
Say hello to my little friend...
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Naomi 29e31s bezel part number?
Cheers guys
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: Naomi 29e31s bezel part number?
the 29e31 bezel is also for the 2930/31/34 nanaos so isnt it also a nanao bezel .
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Naomi 29e31s bezel part number?
the sanwa 29e31s is a semi flat crt whereas the nanao's are all curved crtMrMikeLU wrote:the 29e31 bezel is also for the 2930/31/34 nanaos so isnt it also a nanao bezel .
- zorahk
- AO Awards 2009 Winner
- Posts: 510
- Joined: September 9th, 2009, 1:48 am
- Location:
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Naomi 29e31s bezel part number?
they all look exactly the same to mezorahk wrote:Aren't the 30/31/34 curved less than the 8/9/32 though?
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Naomi 29e31s bezel part number?
The 30 and 31 definitely have a different curvature to the 8 and 9
- grantspain
- Tech Head
- Posts: 4824
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Naomi 29e31s bezel part number?
i know that the 32/34 are the same as ms9 as i put a naomi bezel from a 32 onto a ms9 to check
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: Naomi 29e31s bezel part number?
the sanwa has th same curve like the 30/31/34. and the pfx has sidecompression
- zorahk
- AO Awards 2009 Winner
- Posts: 510
- Joined: September 9th, 2009, 1:48 am
- Location:
Re: Naomi 29e31s bezel part number?
The MS2932 I know for a fact has the same curvature as MS9/MS8 monitors.
The MS2930, 31, and 34 are less curved than those, however I do not believe they are as semi-flat as the sanwa is.
http://www.kiban.ath.cx/kyoutai/blast.htm"
if you notice the monitor picture, you will see what I'm talking about. I think the 30/31/34 are likely in between the MS9 and the Sanwa 29e31s.
The MS2930, 31, and 34 are less curved than those, however I do not believe they are as semi-flat as the sanwa is.
http://www.kiban.ath.cx/kyoutai/blast.htm"
if you notice the monitor picture, you will see what I'm talking about. I think the 30/31/34 are likely in between the MS9 and the Sanwa 29e31s.
хорошо!
-
- Please Continue...
- Posts: 45
- Joined: October 21st, 2009, 6:16 pm
- Location:
Re: Naomi 29e31s bezel part number?
I have one bezel for my 29e31and 2934.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Naomi 29e31s bezel part number?
For reference, I made this pic:
NOA-1502-01 for MS-2932 and MS8-29 / MS9-29
NOA-1502-02 for MS-2930 / 2931 / 2933 / 2934 and Sanwa 29E31S
NOA-1502-03 for Toshiba PF D29C051 and Sanwa 29PFX
There might be others, but those are the most common ones.
EDIT: corrected the part numbers
NOA-1502-01 for MS-2932 and MS8-29 / MS9-29
NOA-1502-02 for MS-2930 / 2931 / 2933 / 2934 and Sanwa 29E31S
NOA-1502-03 for Toshiba PF D29C051 and Sanwa 29PFX
There might be others, but those are the most common ones.
EDIT: corrected the part numbers
You do not have the required permissions to view the files attached to this post.
Last edited by nem on April 21st, 2019, 1:43 pm, edited 1 time in total.
-
- Please Continue...
- Posts: 1
- Joined: December 15th, 2018, 6:07 am
- Location: USA
- eBay: N/A
Re: Naomi 29e31s bezel part number?
Thanks for the link.zorahk wrote: ↑December 2nd, 2009, 3:24 am The MS2932 I know for a fact has the same curvature as MS9/MS8 monitors.
The MS2930, 31, and 34 are less curved than those, however I do not believe they are as semi-flat as the sanwa is.
http://www.kiban.ath.cx/kyoutai/blast.htm"
if you notice the monitor picture, you will see what I'm talking about. I think the 30/31/34 are likely in between the MS9 and the Sanwa 29e31s.
- mukurop
- Posts: 109
- Joined: September 19th, 2008, 11:00 pm
- Location: Italy
- eBay: mukuro_w
Re: Naomi 29e31s bezel part number?
I Have the bezel wih complete White Shell in good cindition, let me know if you strll need, I Have also the sanwa 29e31s picture tube.
-
- Please Continue...
- Posts: 18
- Joined: October 26th, 2015, 1:12 pm
- Location: Villemomble - France
Re: Naomi 29e31s bezel part number?
Hi guys,
Just for you to know : I have a screen cover NOA-1501-02 with infrared emitters from a gun cab since months. I performed my tests and cabling on my NNC but I planned to acquire a Naomi with the proper screen. I just find a Naomi with a 29e31s combo that should have suited well with this screen cover based on the informations I read here.
Unfortunatly, that did not match at all. I replaced the screen with a ms2932 combo then (the last combinaison I did not try) and I was able to close the cab. BUT I had to remove the spacers to do that and this is a crucial information on this thread : the spacers are not the same for each screen. The NNC flat screen has small spacers while the Shanghai Novel has huge 19mm spacers.
I have a little gap on the corners of the screen but it is very discreet and my new screen is awesome.
The Tosh PF and Sanwa PFX are flat. The MS-2932 is very curvy on both axis. The MS-2930, 31, 33 and 34 seem to be curvy on 1 axis only. The Shanghai Novel of the 29e31s combo is moderatly curvated on both axis and I think it is a dedicated screen cover :
I hope this will help.
Just for you to know : I have a screen cover NOA-1501-02 with infrared emitters from a gun cab since months. I performed my tests and cabling on my NNC but I planned to acquire a Naomi with the proper screen. I just find a Naomi with a 29e31s combo that should have suited well with this screen cover based on the informations I read here.
Unfortunatly, that did not match at all. I replaced the screen with a ms2932 combo then (the last combinaison I did not try) and I was able to close the cab. BUT I had to remove the spacers to do that and this is a crucial information on this thread : the spacers are not the same for each screen. The NNC flat screen has small spacers while the Shanghai Novel has huge 19mm spacers.
I have a little gap on the corners of the screen but it is very discreet and my new screen is awesome.
The Tosh PF and Sanwa PFX are flat. The MS-2932 is very curvy on both axis. The MS-2930, 31, 33 and 34 seem to be curvy on 1 axis only. The Shanghai Novel of the 29e31s combo is moderatly curvated on both axis and I think it is a dedicated screen cover :
I hope this will help.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Naomi 29e31s bezel part number?
I don't understand. What combination did you have problems with? A Shanghai Novel 29E31S with a NOA-1502-02 bezel? I have that combination here, it's a perfect fit.
You're right about the spacers, they are indeed different size for the two tubes.
You're right about the spacers, they are indeed different size for the two tubes.
-
- Please Continue...
- Posts: 18
- Joined: October 26th, 2015, 1:12 pm
- Location: Villemomble - France
Re: Naomi 29e31s bezel part number?
It didn't fit for me with the 02 bezel and the Shanghai Novel. Did you used the 19mm spacers ? The bezel I have with the SN is very narrow on the top and bottom. I did not check the curvature on the other side. Maybe it is similar (and thus it would fit with smaller spacers) but this bezel is a different model without any code on it's own.