Page 64 of 66
Re: It's for free!
Posted: April 8th, 2020, 1:28 pm
by cools
I recently asked if anyone had any used but serviceable buttons spare I could have for cheap, and some kindly souls sent me a load of stuff for free. I've taken the bits I could use immediately, added in bits I had in my spares box of no use to me, and am passing everything on.
Would prefer to send out in as few packages as possible - I've split out the unusual bits - if someone wanted to take the bulk, take what they need, add some extras and re-gift again that'd be cool (no flipping please).
Seimitsu buttons, balltops and LS40 shaft cover. The 24mm is missing its nut.
20200408_093437.jpg
Sanwa buttons, ball tops and JLF-with-shaft-cover dustwashers (not matching - different thickness of texture). The green and blue 30mm are ever-so-slightly discoloured so may not match others.
20200408_093829.jpg
Assorted very discoloured. Good for painting/dying/parts, or aging a CP.
20200408_130104.jpg
The following appear to be rare parts, so I've split them out.
Interesting old-style 24mm flat plunger Sanwa green and yellow.
20200408_114530.jpg
Convex dust washer, same dimensions as the JLF-with-shaft-cover dust washers.
20200408_125955.jpg
Re: It's for free!
Posted: April 8th, 2020, 2:31 pm
by NeoRetro
cools wrote: ↑April 8th, 2020, 1:28 pm
I recently asked if anyone had any used but serviceable buttons spare I could have for cheap, and some kindly souls sent me a load of stuff for free. I've taken the bits I could use immediately, added in bits I had in my spares box of no use to me, and am passing everything on.
Would prefer to send out in as few packages as possible - I've split out the unusual bits - if someone wanted to take the bulk, take what they need, add some extras and re-gift again that'd be cool (no flipping please).
Seimitsu buttons, balltops and LS40 shaft cover. The 24mm is missing its nut.
20200408_093437.jpg
Sanwa buttons, ball tops and JLF-with-shaft-cover dustwashers (not matching - different thickness of texture). The green and blue 30mm are ever-so-slightly discoloured so may not match others.
20200408_093829.jpg
Assorted very discoloured. Good for painting/dying/parts, or aging a CP.
20200408_130104.jpg
The following appear to be rare parts, so I've split them out.
Interesting old-style 24mm flat plunger Sanwa green and yellow.
20200408_114530.jpg
Convex dust washer, same dimensions as the JLF-with-shaft-cover dust washers.
20200408_125955.jpg
Could I take these please? PM incoming
Re: It's for free!
Posted: April 8th, 2020, 4:12 pm
by wigsplitta
Nice. If any of the next in line people happen to have any dark blue buttons and balltops spare, feel free to bung them into the mix
My usual goto shop is out of stock at the moment
Re: It's for free!
Posted: May 8th, 2020, 7:31 am
by Jan
if anyone happens to have these boards, drop me a line
Re: It's for free!
Posted: May 8th, 2020, 1:29 pm
by thegreathopper
kernow wrote: ↑May 8th, 2020, 8:43 am
I'm looking for a couple black 24mm balltops if anyone has x
Just checked my box of ball tops, have a couple of black but just measured and realise mine are all 30mm. Sorry man.
Re: It's for free!
Posted: April 1st, 2021, 5:46 pm
by darksoft
FREE Giveaway Aliens 3 metal case
I believe is the same case being shown here:
https://www.ebay.com/itm/Alien-3-EXPORT ... 3796106230
It's only the case. Inside there is no system32.
Re: It's for free!
Posted: April 9th, 2021, 11:43 am
by Jamie
I've got a few CRTs that are just in the way, not bothered about selling them so would like to give them away if anyone wants one. They are:
Sony Trinitron - silver flat widescreen 28inch. GONE
Sony Trinitron - silver flat 29 inch - GONE
Sony Trinitron - silver flat 29 inch GONE
Sony Trinitron - black curved 29 inch - GONE
B&O MS6000 - 28inch - GONE
B&O MX7000 - 28inch (missing contrast glass, damaged case) - GONE
All 4:3 except for the top one, as these have been in my garage they will be dusty and have some scuffs, no remotes. Free to anyone who wants them, collection only obviously, Located in Stourbridge, West Midlands.
Re: It's for free!
Posted: April 9th, 2021, 3:17 pm
by geotrig
Some nice tvs there !
Re: It's for free!
Posted: October 23rd, 2021, 7:24 pm
by cools
Madcatz SFIV TE Fightstick case. No electronics.
TAKEN
Re: It's for free!
Posted: October 23rd, 2021, 8:20 pm
by markedkiller78
@LEGENOARYNINLIA N64 kombat time
Re: It's for free!
Posted: October 23rd, 2021, 8:22 pm
by Brettster
I would like the stick case if its still available ?
will drop you a PM too
Re: It's for free!
Posted: October 24th, 2021, 6:14 am
by LEGENOARYNINLIA
markedkiller78 wrote: ↑October 23rd, 2021, 8:20 pm
@LEGENOARYNINLIA N64 kombat time
Thanks, but I'm too late
Re: It's for free!
Posted: October 24th, 2021, 10:14 pm
by AMurderOfCrows
i really need the metal plate from a Mad Catz TE stick, but i bet shipping on that would be crazy.
Re: It's for free!
Posted: October 26th, 2021, 8:09 pm
by Neo'nate
UK only guys, just postage to pay if interested in any of these items
PSP disks full of iso's
PSP disks with series of Lost on . . .
Bunch of PC CD Roms
gone
Japan PSP Talkman
JPN GC FF CC - no case, as pictured
Xbox 360 game PS as pictured
Re: It's for free!
Posted: October 26th, 2021, 8:29 pm
by ChrisBEANS
Nice freebies. Kudos
For free: Egret 2 broken Illumination Panel
Posted: January 6th, 2022, 8:51 am
by alperen
Gone. Thank you!!
Hi guys
Maybe somebody has a repro project and need an original panel.
For free. But I have to charge the transport from switzerland to you.
Best Regards
Re: It's for free!
Posted: January 6th, 2022, 1:15 pm
by FrancoB
Very kind offer. I'm sure someone will make great use of that
Re: It's for free!
Posted: January 6th, 2022, 9:24 pm
by cools
Bag of used bits - mainly Sanwa + clone Sanwa buttons.IMG_20220106_212101.jpg
Note these vary from lightly to heavily used. Good for spare bits or respraying. TAKEN
Re: It's for free!
Posted: January 6th, 2022, 9:32 pm
by cools
Lindbergh/Noir 2L12B alberto panel.
Demo/prototype he sent me when we were working on my Lindbergh panels. Would make a great full size stick/supergun.
One corner is bent. I do not have artwork for this, I don't believe alberto does either. Give it a clean and stick some vinyl wrap on.
IMG_20220106_212606.jpg
IMG_20220106_212640.jpg
IMG_20220106_212619.jpg
Re: It's for free!
Posted: February 20th, 2022, 1:06 pm
by FrancoB
I've got one spare set of components required to do the Bomb Jack Save High Score mod a'la https://www.jrok.com/sohs/bjack_shs.html
Free, just pay postage. Taken.