Page 1 of 1
Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 3:42 pm
by Moskovskaya
I have this problem with the Cave 1st gen hardware pcbs Dodonpachi and ESP Ra.De:
http://srv026.pixpack.net/2008100516220 ... nvnvnd.jpg
This black border I got only with aforementioned pcbs, with CPS2, MVS and other PCBs I can get fullscreen.
My monitor is a Hantarex Polostar Multisync. It is not possible to move the picture further down with the H-Phase pot. It is still possible to stretch the picture with the H-Amp pot, but then the top of the picture is missing.
Is there anything like an easy fix to this problem?
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 4:23 pm
by grantspain
does the h freq pot not help,also there are 3 pots on the east/west correction board-2 of them are in the h sync circuit
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 4:50 pm
by Moskovskaya
grantspain wrote:does the h freq pot not help,also there are 3 pots on the east/west correction board-2 of them are in the h sync circuit
No, the H-Frep does not help, what/where ist the east/west correction board?
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 5:00 pm
by grantspain
the east/west board is a small circuit board that stands upright near the the centre of the chassis
there are 3 adjustment pots on it but i can't remember what they do
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 5:05 pm
by Moskovskaya
grantspain wrote:the east/west board is a small circuit board that stands upright near the the centre of the chassis
there are 3 adjustment pots on it but i can't remember what they do
Yes, I have found them, actually there are five pots labeled RV1-5. But I won't touch them before I know what they do
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 5:14 pm
by grantspain
i will have a mess around with mine at work on tuesday if you like,i have 6 polostar
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 5:38 pm
by Moskovskaya
grantspain wrote:i will have a mess around with mine at work on tuesday if you like,i have 6 polostar
Thank you very much, but I have fixed it!
I have found with google a Polostar manual and it says, that the RV1 is the pot for the 15kHz horizontal phase. I tried it and it worked!
But I have to thank you for the hint with the east/west connection board.
You may find the manual here:
http://andysarcade.de/gen_unicab_d.html
Re: Can't get fullscreen for Dodonpachi and ESP Ra.De
Posted: October 5th, 2008, 5:41 pm
by grantspain
nice one bud,a bit of team work
